「CoreDNS」の版間の差分

提供: ArchWiki
ナビゲーションに移動 検索に移動
(序文を飜訳)
(→‎設定: 飜訳)
15行目: 15行目:
 
== 設定 ==
 
== 設定 ==
   
Currently only {{AUR|coredns-git}} provides an example configuration file. You can find that here: [https://aur.archlinux.org/cgit/aur.git/tree/corefile.example?h=coredns-git Example CoreDNS configuration file]
+
現在、{{AUR|coredns-git}} だけが設定ファイルの例を提供しています。それはこちらで見ることができます。 [https://aur.archlinux.org/cgit/aur.git/tree/corefile.example?h=coredns-git CoreDNS の設定ファイル例]
   
systemd will look in {{ic|/etc/coredns/Corefile}}, save the above configuration file in that location.
+
systemd {{ic|/etc/coredns/Corefile}} を探すので、上記の設定ファイルをここに保存してください。
   
[[Start/enable]] {{ic|coredns.service}}.
+
{{ic|coredns.service}} を[[起動/有効化]]します。
 
* {{man|1|coredns|url=https://coredns.io/manual/toc/}}
 
* {{man|1|coredns|url=https://coredns.io/manual/toc/}}
   
With the example configuration CoreDNS will start on port 1053. You can use the {{ic|drill}} command to verify to use CoreDNS is working: {{ic|drill archlinux.org @127.0.0.1 -p 1053}}
+
この設定例では、CoreDNS 1053番ポートで起動します。CoreDNS の利用を確認するために、{{ic|drill}} コマンドを使用することができます。{{ic|drill archlinux.org @127.0.0.1 -p 1053}}
   
 
=== アップストリームリゾルバとしての NextDNS ===
 
=== アップストリームリゾルバとしての NextDNS ===

2022年6月28日 (火) 10:28時点における版

関連記事

CoreDNS は、Go で書かれた DNS サーバー/フォワーダーで、プラグインをチェーンしています。各プラグインは、(DNS)機能を実行します。

CoreDNS は、高速で柔軟な DNS サーバーです。キーワードは柔軟性です。CoreDNS では、プラグインを利用することで、DNS データで好きなことをすることができます。もし、ある機能が最初から提供されていない場合、プラグインを書くことでそれを追加することができます。

CoreDNS は、UDP/TCP (go'old DNS), TLS (RFC 7858), DoT, DNS over HTTP/2 - DoH - (RFC 8484) で入ってくる DNS 要求をリッスンすることができます。

インストール

corednsAURcoredns-binAUR または coredns-gitAUR パッケージをインストールします

設定

現在、coredns-gitAUR だけが設定ファイルの例を提供しています。それはこちらで見ることができます。 CoreDNS の設定ファイル例

systemd は /etc/coredns/Corefile を探すので、上記の設定ファイルをここに保存してください。

coredns.service起動/有効化します。

この設定例では、CoreDNS は 1053番ポートで起動します。CoreDNS の利用を確認するために、drill コマンドを使用することができます。drill archlinux.org @127.0.0.1 -p 1053

アップストリームリゾルバとしての NextDNS

If you would like to encrypt your recursive requests, edit the Corefile and remove lines 6 through 12 in the example configuration. forward . tls://45.90.28.0 tls://45.90.30.0 { tls_servername dns.nextdns.io }

You can use any dns53 or DoT resolver in the forward. as the local resolver, edit /etc/coredns/Corefile and change .:1053 to .:53 you can then configure 127.0.0.1 as your nameserver (see see Domain name resolution). Restart coredns.service after that.

Run journalctl -u coredns as root to verify things are working by default. The resolver will now listen on port 53. If the resolver should be accessible from other hosts, configure other network interfaces in /etc/coredns/Corefile with bind. Also the acl plugin can be used to block ranges that should be use the server for recursion. Refer to CoreDNS plugin documentation for more information.

ノート: Unless you specifically want to run an open DNS resolver, do not configure the resolver to listen on a public (internet-facing) IP address.

If the resolver should respect entries from the /etc/hosts file, add a hosts line to /etc/coredns/Corefile.

設定例

これは、便利なプラグインを使用した設定です。

/etc/coredns/Corefile
.:53 {
       bind 127.0.53.1 192.168.1.254 192.0.0.1 
       bufsize 1232 
       acl { 
               allow net 192.168.0.0/16 172.16.0.0/12 10.0.0.0/8 192.0.0.0/24
               block
       }
       hosts { 
               reload 0
               fallthrough
       }
       loadbalance
       forward . tls://45.90.28.0 tls://45.90.30.0 {
               tls_servername dns.nextdns.io
       }
       cache {
               success 4096
               denial  1024
               prefetch 512
       }
       prometheus :9153
       errors
       log
}

参照