iOS

提供: ArchWiki
2014年12月26日 (金) 00:12時点におけるKusakata (トーク | 投稿記録)による版
(差分) ← 古い版 | 最新版 (差分) | 新しい版 → (差分)
ナビゲーションに移動 検索に移動

関連記事

この記事では Arch Linux で idevice を使用する方法を説明します。

必要なパッケージ

ThunarGNOME Files で iOS デバイスを扱うには、gvfs-afcusbmuxd をインストールして下さい。インストール後 X を再起動します。それで Thunar や Files に iOS デバイスが表示されるはずです。KDE のファイルマネージャではテストしていません。

ノート: All deps should get pulled down when installing gvfs-afc.

iPod のマウントポイントの変更

伝統的に iPod は vfat ファイルシステム (稀に hfsplus) が入っている普通の USB ストレージデバイスと同じようにアクセスすることができます。詳しい説明はUSB ストレージデバイスの記事を見て下さい。

udisks2 が動作している場合、接続された iPod は /run/media/$USER/iPod name にマウントされます (古い udisks は /media/<iPod name> を使います)。

iPod のボリュームラベルが長くて、空白や大文字・小文字が混じっていると、不便なことがあります。dosfstools パッケージの dosfslabel を使うことでボリュームを簡単に好都合なように変更することが可能です:

  • 現在のボリュームラベルを取得・確認:
# dosfslabel /dev/sdXY
  • 新しいボリュームラベルを設定:
# dosfslabel /dev/sdXY ArchPod
  • デバイスをアンマウント:
$ udisksctl unmount -b /dev/sdXY
  • もう一度マウントしなおす:
$ udisksctl mount -b /dev/sdXY

/dev/sdxx は iPod の現在のデバイスノードに置き換えてください。

動画や写真のインポート

通常は <mountpoint>/DCIM/100APPLE で動画と写真の両方が見つかります。

HTML5 動画

Typically you want to convert MOV files to a HTML5 video format like OGV using ffmpeg2theora. Note that the creation date metadata is not in the converted video, so you need to use a script like:

   find -name "*.MOV" | while read mov
   do
       d=$(gst-discoverer-0.10 -v $mov | awk '/datetime:/{print $2}' | tr -d \")
       base=${mov%.*}
       if test -f $base.ogv
       then
               touch -d${d} $base.ogv
               ls -l $base.ogv
       else
               echo $base.ogv missing
       fi
   done

And use cp -a or rsync -t in order to preserve the file's date & time.

写真をインポートして削除する

You can move photos and videos out of <mountpoint>/DCIM/100APPLE, however you need to trigger a rebuild of the "Camera Roll" database by deleting the old databases.

   PhotoData$ sudo rm Photos* com.apple.photos.caches_metadata.plist

iPod 用に動画を変換

第 5/5.5 世代

Handbrake

Handbrake は様々なバージョンの iPod 用のプリセットが入っている気の利いたツールです。CLI と GTK 版がそれぞれ handbrake-clihandbrake として pacman でインストールできます。

CLI で使うときは、http://trac.handbrake.fr/wiki/CLIGuide にガイドがあります。

DVD to iPod

Get from: podencoderAUR
Depends on: aur/gpac mplayer

Has detailed help, and is fairly self explanatory.

もしくは DVD リッピングに書かれている方法を使って、iPod が対応しているフォーマットに変換することもできます。

Video File to iPod

Get from: http://thomer.com/howtos/mp4ize
Depends on: mplayer

iPod や iPhone に対応する mp4 に動画ファイルを変換する Ruby スクリプトです。

高度な方法

Avidemux

公式リポジトリから avidemux-gtk または avidemux-qt をインストールしてください。

This can convert to mp4 files. If you enforce a hard max of bit rate @ 700ish and keep the video size to 720x480 or 320x240 than it works fine for video file exporting.

Mencoder

公式リポジトリから mplayer パッケージをインストールしてください。

Has extremely comprehensive configuration support, which will be able to spit out iPod-compatible video files. Check out man mencoder; a lot of MPlayer opts will also affect encoding.

A basic guide is also available at MEncoder.

An example command to encode iPhone/iPod Touch-compatible video:

mencoder INPUT -o output.mp4 \
-vf scale=480:-10,harddup \
-oac faac -faacopts mpeg=4:object=2:raw:br=128 \
-of lavf -lavfopts format=mp4 \
-ovc x264 -x264encopts nocabac:level_idc=30:bframes=0

FFMpeg

公式リポジトリから ffmpeg パッケージをインストールしてください。

Another encoder with comprehensive configuration support. Example command to encode for 5G iPod:

ffmpeg -vcodec xvid -b 300 -qmin 3 -qmax 5 -bufsize 4096 \
-g 300 -acodec aac -ab 96 -i INPUT -s 320x240 \
-aspect 4:3 output.mp4

or iPod Touch/iPhone compatible video output:

ffmpeg -f mp4 -vcodec mpeg4 -maxrate 1000 -b 700 -qmin 3 -qmax 5\
-bufsize 4096 -g 300 -acodec aac -ab 192 -s 480×320 -aspect 4:3 -i INPUT output.mp4

iPhone/iPod Touch

イントロダクション

By default, neither the iPhone nor the iPod Touch present mass storage capability over USB, though there exist two solutions for accessing your files.

The first is to mount your device through the FUSE file system SSHFS. This requires jailbreaking, which can be done on any major OS using e.g. Absinthe for recent iOS versions. After jailbreaking, an SSH server will also need to be installed on the device, which can be done through the Cydia program, installed on the device during the jailbreak process.

The second is to use a different FUSE file system called iFuse, which allows you to mount your device through USB, as you normally would. This method requires no hacking and is in general the better solution, though be aware that the software is still under heavy development. As of late, however, it has proven to be rather reliable and stable.

ノート: The current releases of libgpod and gtkpod support the iPod Touch and the iPhone OS 3.1.x up to iOS 4.3.x. It is possible to transfer pictures and music without limitations.

次のページを参照: [1]

Making Friends with the Device

SSHFS

After this the easiest way to properly initialise a few things on the device's side is with the iPod convenience script. This is available in the AUR as ipod-convenienceAUR

Next do modprobe fuse to actually load the fuse module. You may also want to add it to your MODULES array in /etc/rc.conf to have it loaded on boot.

A few things may need changing in the script, depending on your setup. If you do not use sudo, replace:

sudo lsusb -v -d 05ac: | grep iSerial | awk '{print $3}' | cut -b1-16 | xargs printf "FirewireGuid: 0x%s" >> $MOUNTPOINT/iTunes_Control/Device/SysInfo

with:

su -c "lsusb -v -d 05ac: | grep iSerial | awk '{print $3}' | cut -b1-16 | xargs printf \"FirewireGuid: 0x%s\" >> $MOUNTPOINT/iTunes_Control/Device/SysInfo"

in the file /usr/share/ipod-convenience/mount-umount. You may also need to replace:

PROCESS=`ssh root@$IPADDRESS ps x | grep MobileMusicPlayer | grep -v grep | awk '{print $1}'`

with:

PROCESS=`ssh root@$IPADDRESS ps ax | grep MobileMusicPlayer | grep -v grep | awk '{print $1}'`

(I'm not sure under what circumstances this is necessary; it was on my iPod Touch running 2.2.1, and it will not have any adverse affect under other firmware version)

After that, edit the /etc/default/ipod-convenience file with details of your device's IP address, and create the mount point, which is /media/ipod by default (make sure to set the permissions correctly if you want it accessible by a regular user)

To actually mount the device, run ipod-touch-mount or iphone-mount (they both do exactly the same thing so it doesn't matter which). This should prompt for the root password of the device twice, which is 'alpine' by default in firmware versions 1.1 and up. This will need to be done every time you want to sync. (This can be done without having to type the password each time by using SSH keys - see Using SSH Keys for more information)

iFuse

ノート: If using an iPad/iPad2 that has a screen password, one must unlock the device to gain access through the USB interface.
ノート: The current version of ifuse is unable to mount an iPad2 using iOS v5.0.1. The git version of libimobiledevice in AUR works with an iPod using iOS v5.1.1

usbmuxd, libplist, libimobiledevice, ifuse をインストールする必要があります。libimobiledevice は ifuse と usbmuxd から依存されているので、次のコマンドで4つのパッケージがインストールできます:

# pacman -S ifuse usbmuxd libplist

Now make sure that you have the fuse module loaded by doing modprobe fuse, assuming that you do not have it in /etc/rc.conf already.

You can now mount your device. Make sure it is unlocked before you plug it in, or it won't be recognized.

# ifuse <mountpoint>

The mountpoint field is where you want to have it mounted.

And you're done! You should be able to point your syncing software of choice to the mount point and be able to transfer files.

To unmount your device:

# umount <mountpoint>

HashInfo ファイルの生成

If you have not previously synced your device using iTunes specifically, you will get error messages telling you that the HashInfo file is missing. This can be fixed by making an iTunes installation on MacOS or Windows create it (by plugging in the iPod there). Alternatively you can create this file yourself, instructions can be found on this website.

データベースの明瞭化

Since firmware version 2.0, Apple has obfuscated the music database. If you are using recent firmware, the file /System/Library/Lockdown/Checkpoint.xml can be modified to enable use of the older, non-obfuscated database. Replace:

<key>DBVersion</key>
<integer>4</integer>

with:

<key>DBVersion</key>
<integer>2</integer>

Then reboot your device.

If syncing fails with "ERROR: Unsupported checksum type '0' in cbk file generation!", you may need to leave this at 4. libgpod seems to expect a hashed database.

同期

Use your favourite iPod-compatible program. Individual configuration will vary, but in general, pointing your program to your specified mount point should yield good results.

After you've synced, run ipod-touch-umount (or iphone-umount, depending on your taste) to unmount the SSHFS file system and restart the MobileMusicPlayer process on the device, so that the new music database is read.

If you used iFuse, simply type:

# umount <mountpoint>

You will still need to reload the MobileMusicPlayer process. If your device is not jailbroken, then you are stuck restarting it.

iFuse - iPhone OS 3.x と 4.x

警告: このソフトウェアは不安定だとされており、本番環境で使うのは推奨されません。

Make sure you already installed base-devel, which contains several programs needed to compile your new components. If you did not, just run:

# pacman -S base-devel

which will install everything you will need.

You will need to install libplist, libimobiledevice, libgpod, usbmuxd and ifuse.

Now make sure that you have the fuse module loaded by doing modprobe fuse, assuming that you do not have it in /etc/rc.conf already. Check if the group "usbmux" has been created and add your user using

# gpasswd -a <user> usbmux

To make sure the new rules apply, execute

$ udevadm control --reload-rules

and plug in your iPod/iPhone.

Run as ROOT:

# usbmuxd

Now you should the be able to mount your device by running

$ ifuse ~/ipod

or similar. Make sure the directory used exists and is accessible to your user.

Mount the device and create the iTunes_Control/Device directory. Then, get your UUID. It should be in the syslog from usbmuxd, or you can find it by running

$ lsusb -v | egrep "iSerial.*[a-f0-9]{40}"

It should be 40 characters long. Then, run

$ ipod-read-sysinfo-extended <uuid> <mountpoint>. 

This should generate a file named iTunes_Control/Device/SysInfoExtended.

Now, start up your favourite app, it should detect the device via libgpod. I recommend using gtkpod-git for the time being, as that is what the libgpod developers seem to be using for debugging purposes.

ノート: If gtkpod/gtkpod-git seems to work only from root/sudo while your user only gets the slash screen, you can delete your ~/.gtkpod folder and retry. Note that gtkpod will forget your preferences.

Rhythmbox

Rhythmbox は Gnome Virtual File System を使ってモバイルデバイスを検出します。iFuse を使っている場合、gvfs-afc をインストールする必要があります:

# pacman -S gvfs-afc

iPod Classic/Nano3g

You need to set up the iPod to make libgpod able to find its FireWire ID. For this, you will need to get your FireWire ID manually

1) Mount the iPod as a rw mount point. In the following example, I will use /mnt/ipod.

2 ) Find the serial number by typing

  sudo lsusb -v | grep -i Serial 

this should print a 16 character long string like 00A1234567891231 (it will have no colons or hyphens)

3) Once you have that number, create or edit /mnt/ipod/iPod_Control/Device/SysInfo. Add to that file the line below:

  FirewireGuid: 0xffffffffffffffff

(replace ffffffffffffffff with the 16 digit string you obtained at the previous step and do not forget the leading 0x before the string)

Your iPod can now be managed with Amarok or gtkpod.

iPod 管理アプリ

  • Rhythmbox
    • GTK インターフェイス (GNOME)
    • 公式の GNOME プロジェクトに入っています。
    • 高速で軽量なインターフェイス。
    • コンピュータと iPod の音楽を管理
    • Download or stream podcasts and video podcasts
    • Queue up songs and podcasts
    • Last.fm integration
    • Live radio stations
    • Jamendo and Magnatune support
    • Audio CD burning
    • Album cover display
    • Song lyrics display
    • DAAP sharing
  • Banshee
    • GTK インターフェイス (GNOME)
    • Mono を使っているため、やや重く、rhythmbox よりもリソースを消費します
    • Device Sync: Sync your music and videos to your Android, iPod, or other device - or import its media
    • Podcasts: Download or stream podcasts and video podcasts
    • Play Queue: Queue up songs, videos, and podcasts, or let the Auto DJ take over
    • Shuffle Modes: Shuffle (or Auto DJ) by artist, album, rating, or even songs' acoustic similarity
    • Album Art: Artwork is automatically fetched as you listen
    • Powerful Search, Smart Playlists: Find exactly what you want, fast
    • Video Support: All the power of Banshee, now for your videos
  • Yamipod
    • GTK インターフェイス (GNOME)
    • super lightweight application for managing ONLY music on your iPod (not on your computer)
    • easy ratings edit
    • PC から iPod に同期
    • News RSS and podcasts to iPod upload
    • Last.fm サポート
    • playlist サポート
  • gtkpod
    • GTK インターフェイス (GNOME)
    • Read your existing iTunesDB (i.e. import the existing contents of your iPod including play counts, ratings and on-the-go playlists).
    • Add MP3, WAV, M4A (non-protected AAC), M4B (audio book), podcasts, and various video files (single files, directories or existing playlists) to the **iPod. You need a third party product to download podcasts, like 'bashpodder' or 'gpodder'
    • View, add and modify Cover Art
    • Browse the contents of your local hard disk by album/artist/genre by adding all your songs to the 'local' database. From there the tracks can be **dragged over to the iPod/Shuffle easily.
    • Create and modify playlists, including smart playlists.
    • You can choose the charset the ID3 tags are encoded in from within gtkpod. The default is the charset currently used by your locale setting.
    • Extract tag information (artist, album, title...) from the filename if you supply a template.
    • Detect duplicates when adding songs (optional).
    • Remove and export tracks from your iPod.
    • Modify ID3 tags -- changes are also updated in the original file (optional).
    • Refresh ID3 tags from file (if you have changed the tags in the original file).
    • Sync directories.
    • Normalize the volume of your tracks (uses mp3gain or the replay-gain tag)
    • Write the updated iTunesDB and added songs to your iPod.
    • Work offline and synchronize your new playlists / songs with the iPod at a later time.
    • Export your korganizer/kaddressbook/Thunderbird/evocalendar/evolution/webcalendar... data to the iPod (scripts for other programs can be added).
  • Floola
    • GTK インターフェイス (GNOME)
  • Amarok
    • KDE/qt インターフェイス
  • qPod
    • KDE/qt インターフェイス
    • GNUpod のフロントエンド
  • GNUpod
    • コマンドラインのみ
  • jakpod
    • JakPod は Java で書かれており、音楽や動画ファイルを iPod にコピーすることができます。
    • 第6世代 iPod Nano サポート
    • jakpodAUR

参照