MinGW パッケージガイドライン

提供: ArchWiki
2018年2月6日 (火) 23:08時点におけるKusakata.bot (トーク | 投稿記録)による版 (文字列「http://sourceforge.net/」を「https://sourceforge.net/」に置換)
ナビゲーションに移動 検索に移動

このページでは、GCC を使って Windows で動作するソフトウェアの PKGBUILD を記述する方法を説明しています。Linux 上で Windows のソフトウェアをビルドする方法は2つあります:

  • mingw-w64: secure crt, Vista+ API, DDK (ReactOS), DirectX (Wine) をサポートする32ビットと64ビットのツールチェイン。サポートされている機能の完全なリストと、MinGW.org と違うところについては、こちら を見て下さい。Arch の [community] リポジトリにある mingw-w64-gccAUR でインストールできます。
  • MinGW: DirectX を部分的にサポートする32ビットのツールチェイン。スレッドローカルストレージと浮動小数点ライブラリのサポートの実装に長年問題を抱えています。公式リポジトリと AUR からは削除されました。

パッケージの命名規則

mingw-w64 のパッケージには mingw-w64-pkgname という名前を付けて下さい。パッケージの静的なバージョンをビルドする場合は、パッケージの名前に -static を付けます (必要な場合については下を参照)。

パッケージング

多数のビルド環境が存在し低水準な問題に溢れているためクロスプラットフォームパッケージの作成は非常に困難です。以下の事柄に注意してください:

  • depends に常に mingw-w64-crtAUR を追加する (依存している他のパッケージが明示的に依存している場合は除く)。
  • makedepends に常に mingw-w64-gccAUR を追加する (mingw-w64-configureAURmingw-w64-cmakeAUR を使用する場合は除く)。
  • options に常に !strip, staticlibs, !buildflags を追加する。
  • オリジナルの pkgdesc を常に使い、pkgdesc の末尾に (mingw-w64) と追記する。
  • 公式パッケージのオリジナルの pkgver を常に使用・追従する。
  • ライブラリの32ビット版と64ビット版の両方を常にビルドする。
  • always put all stuff under the /usr/i686-w64-mingw32 and /usr/x86_64-w64-mingw32 prefix
  • always use any as the architecture (except the package contains executables which must run on the build system)
  • always build both shared and static binaries, unless they conflict
  • consider removing unneeded documentation (rm -r $pkgdir/usr/i686-w64-mingw32/share/{doc,info,man}, rm -r $pkgdir/usr/x86_64-w64-mingw32/share/{doc,info,man})
  • consider using mingw-w64-configureAUR for building with configure scripts
  • consider using mingw-w64-cmakeAUR for building with CMake
  • consider using mingw-w64-qt5-baseAUR or mingw-w64-qt4AUR for building with QMake
  • consider using compilation flags -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions --param=ssp-buffer-size=4 (usually named CFLAGS, CXXFLAGS) when no proper build system is provided
  • consider explicitly stripping symbols with ${_arch}-strip in package()'s for-loop as demonstrated in the below PKGBUILD examples.
    • consider using the find command to iterate over $pkgdir since not all DLLs, static libraries, or executables may reside in their appropriate locations.
      • if the binary is a DLL, use ${_arch}-strip --strip-unneeded *.dll
      • if the binary is a static lib, use ${_arch}-strip -g *.a
  • if a package is modular (requires certain build dependencies, but said dependencies are optional to the end user) add these to makedepends and optdepends. Be sure to subtract them from depends if updating an existing package. Example of this in use: mingw-w64-rubyAUR, mingw-w64-allegroAUR
  • if a package installs a $pkgdir/usr/${_arch}/bin/*-config script, symlink it to $pkgdir/usr/bin/${_arch}-*-config
  • if a package uses autoconf, explicitly set --build="$CHOST" for configure to workaround autoconf bug #108405 or use mingw-w64-configureAUR

As mentioned above, the files should all be installed into /usr/i686-w64-mingw32 and /usr/x86_64-w64-mingw32. Specifically, all DLLs should be put into /usr/*-w64-mingw32/bin as they are dynamic libraries needed at runtime. Their corresponding .dll.a files should go into /usr/*-w64-mingw32/lib. Please delete any unnecessary documentation and perhaps other files from /usr/share. Cross-compilations packages are not meant for the user but only for the compiler and binary distribution, and as such you should try to make them as small as possible.

Always try to match the pkgver in your mingw-w64 packages to the pkgver of the corresponding regular packages in the official Arch Linux repos (not the testing repos). This ensures that the cross-compiled software works exactly the same way on Windows without any unexpected bugs. If packages in Arch are out-of-date, there usually is a good reason and you should still follow the Arch version instead of using the most recent upstream release. If the corresponding native package is in the AUR, you need not follow this version policy, as many AUR packages are often orphaned or left unmaintained.

サンプル

以下の例は一般的な決まり事やビルド環境をカバーしています。

Autotools

pkgname=mingw-w64-foo
pkgver=1.0
pkgrel=1
pkgdesc="Foo bar (mingw-w64)"
arch=('any')
url="http://www.foo.bar"
license=('GPL')
makedepends=('mingw-w64-configure')
depends=('mingw-w64-crt')
options=('!strip' '!buildflags' 'staticlibs')
source=("http://www.foo.bar/foobar.tar.gz")
md5sums=('4736ac4f34fd9a41fa0197eac23bbc24')

_architectures="i686-w64-mingw32 x86_64-w64-mingw32"

build() {
  cd "${srcdir}/foo-$pkgver/"
  for _arch in ${_architectures}; do
    mkdir -p build-${_arch} && pushd build-${_arch}
    ${_arch}-configure ..
    make
    popd
  done
}

package() {
  for _arch in ${_architectures}; do
    cd "${srcdir}/foo-$pkgver/build-${_arch}"
    make DESTDIR="${pkgdir}" install
    ${_arch}-strip --strip-unneeded "$pkgdir"/usr/${_arch}/bin/*.dll
    ${_arch}-strip -g "$pkgdir"/usr/${_arch}/lib/*.a
  done
}

CMake

pkgname=mingw-w64-foo
pkgver=1.0
pkgrel=1
pkgdesc="Foo bar (mingw-w64)"
arch=('any')
url="http://www.foo.bar"
license=('GPL')
makedepends=('mingw-w64-cmake')
depends=('mingw-w64-crt')
options=('!strip' '!buildflags' 'staticlibs')
source=("http://www.foo.bar/foobar.tar.gz")
md5sums=('4736ac4f34fd9a41fa0197eac23bbc24')

_architectures="i686-w64-mingw32 x86_64-w64-mingw32"

build() { 
  unset LDFLAGS
  cd "$srcdir/foo-$pkgver/"
  for _arch in ${_architectures}; do
    mkdir -p build-${_arch} && pushd build-${_arch}
    ${_arch}-cmake \
      -DCMAKE_BUILD_TYPE=Release \
      ..
    make
    popd
  done
}

package() {
  for _arch in ${_architectures}; do
    cd "${srcdir}/foo-$pkgver/build-${_arch}"
    make DESTDIR="${pkgdir}" install
    ${_arch}-strip --strip-unneeded "$pkgdir"/usr/${_arch}/bin/*.dll
    ${_arch}-strip -g "$pkgdir"/usr/${_arch}/lib/*.a
  done
}