「SSHFS」の版間の差分

提供: ArchWiki
ナビゲーションに移動 検索に移動
13行目: 13行目:
   
 
=== マウント ===
 
=== マウント ===
  +
{{Tip|[[Google Authenticator]] を使うことで sshfs のセキュリティを向上させることができます。}}
 
ディレクトリをマウントする前に、対象のディレクトリのファイルパーティションが正しく設定されているか (ユーザーがアクセスできるか) 確認してください。マウントするには、{{ic|sshfs}} を実行してリモートディレクトリをマウントします:
 
ディレクトリをマウントする前に、対象のディレクトリのファイルパーティションが正しく設定されているか (ユーザーがアクセスできるか) 確認してください。マウントするには、{{ic|sshfs}} を実行してリモートディレクトリをマウントします:
$ sshfs ''USERNAME@HOSTNAME_OR_IP:/PATH LOCAL_MOUNT_POINT SSH_OPTIONS''
+
$ sshfs ''USERNAME@HOSTNAME_OR_IP:/REMOTE_PATH LOCAL_MOUNT_POINT SSH_OPTIONS''
   
 
例:
 
例:
$ sshfs sessy@mycomputer:/foo/bar /mnt/bar -C -p 9876
+
$ sshfs sessy@mycomputer:/remote/path /local/path -C -p 9876 -o allow_other
{{ic|9876}} はポート番号に置換えてください
+
{{ic|-p 9876}} はポート番号、{{ic|-C}} は圧縮の使用、{{ic|-o allow_other}} は root 以外のユーザーの読み書の許可です
   
  +
{{Note|-p スイッチを使うのが面倒な場合、{{ic|~/.ssh/config}} でホストごとに非標準ポートを定義することもできます。詳しくは [[Secure Shell#ssh の設定に接続データを保存する]] を参照。}}
{{Note|Users may also define a non-standard port on a host-by-host basis in {{ic|~/.ssh/config}} to avoid appending the -p switch here. For more information see [[Secure Shell#Saving connection data in ssh config]].}}
 
   
 
必要であれば、SSH はパスワードを尋ねます。何度もパスワードを入力したくない場合は、次を読んでください: [http://linuxmafia.com/~karsten/Linux/FAQs/sshrsakey.html How to Use RSA Key Authentication with SSH] または [[SSH 鍵]]。
 
必要であれば、SSH はパスワードを尋ねます。何度もパスワードを入力したくない場合は、次を読んでください: [http://linuxmafia.com/~karsten/Linux/FAQs/sshrsakey.html How to Use RSA Key Authentication with SSH] または [[SSH 鍵]]。
 
{{Tip|To quickly mount a remote dir, do some file-management and unmount it, put this in a script:
 
{{Tip|To quickly mount a remote dir, do some file-management and unmount it, put this in a script:
sshfs USERNAME@HOSTNAME_OR_IP:/PATH LOCAL_MOUNT_POINT SSH_OPTIONS''
+
sshfs USERNAME@HOSTNAME_OR_IP:/REMOTE_PATH LOCAL_MOUNT_POINT SSH_OPTIONS''
mc ~ LOCAL_MOUNT_POINT
+
mc LOCAL_MOUNT_POINT
 
fusermount -u LOCAL_MOUNT_POINT''
 
fusermount -u LOCAL_MOUNT_POINT''
 
This will mount the remote directory, launch MC, and unmount it when you exit.
 
This will mount the remote directory, launch MC, and unmount it when you exit.
62行目: 63行目:
 
起動時や、必要に応じて (ディレクトリのアクセス時に)、自動マウントを行うことができます。どちらにしても、セットアップは {{ic|/etc/[[fstab]]}} で行います。
 
起動時や、必要に応じて (ディレクトリのアクセス時に)、自動マウントを行うことができます。どちらにしても、セットアップは {{ic|/etc/[[fstab]]}} で行います。
   
  +
{{Note|自動マウントは root ユーザーによって行われるため、h通常ユーザーの {{ic|.ssh/config}} で設定した Hosts は使えなくなります。root ユーザーで通常ユーザーの SSH 鍵を使うときは、{{ic|IdentityFile}} オプションにフルパスを指定してください。そして、ホストの署名が {{ic|.ssh/known_hosts}} ファイルに追加されるように root で一度は手動で sshfs マウントを使用します。}}
{{Note|Be mindful that automounting is done through the root user, therefore you cannot use Hosts configured in {{ic|.ssh/config}} of your normal user.
 
 
root ユーザーで通常ユーザーの SSH 鍵を使うときは、{{ic|IdentityFile}} オプションにフルパスを指定してください。
 
 
'''And most importantly''', use each sshfs mount at least once manually '''while root''' so the host's signature is added to the {{ic|.ssh/known_hosts}} file.
 
 
}}
 
   
 
=== 必要に応じてマウント ===
 
=== 必要に応じてマウント ===
94行目: 89行目:
 
''fstab'' の行の例:
 
''fstab'' の行の例:
 
llib@192.168.1.200:/home/llib/FAH /media/FAH2 fuse.sshfs defaults,_netdev 0 0
 
llib@192.168.1.200:/home/llib/FAH /media/FAH2 fuse.sshfs defaults,_netdev 0 0
  +
ユーザーの SSH 鍵を使っている場合、自動的に動作するようになります。[[SSH 鍵]]を見て下さい。
The above will work automatically if you are using an SSH key for the user. See [[Using SSH Keys]].
 
   
 
複数のユーザーで sshfs を使いたい場合:
 
複数のユーザーで sshfs を使いたい場合:
179行目: 174行目:
 
* If you are using non-default key names and are passing it as {{ic|-i .ssh/my_key}}, this won't work. You have to use {{ic|-o IdentityFile<nowiki>=</nowiki>/home/user/.ssh/my_key}}, with the full path to the key.
 
* If you are using non-default key names and are passing it as {{ic|-i .ssh/my_key}}, this won't work. You have to use {{ic|-o IdentityFile<nowiki>=</nowiki>/home/user/.ssh/my_key}}, with the full path to the key.
 
* Adding the option '{{ic|sshfs_debug}}' (as in '{{ic|sshfs -o sshfs_debug user@server ...}}') can help in resolving the issue.
 
* Adding the option '{{ic|sshfs_debug}}' (as in '{{ic|sshfs -o sshfs_debug user@server ...}}') can help in resolving the issue.
  +
* If that doesn't reveal anything useful, you might also try adding the option {{ic|debug}}.
 
* If you're trying to sshfs into a router running DD-WRT or the like, there is a solution [http://www.dd-wrt.com/wiki/index.php/SFTP_with_DD-WRT here]. (note that the -osftp_server=/opt/libexec/sftp-server option can be used to the sshfs command in stead of patching dropbear)
 
* If you're trying to sshfs into a router running DD-WRT or the like, there is a solution [http://www.dd-wrt.com/wiki/index.php/SFTP_with_DD-WRT here]. (note that the -osftp_server=/opt/libexec/sftp-server option can be used to the sshfs command in stead of patching dropbear)
 
* old Forum thread: [https://bbs.archlinux.org/viewtopic.php?id=27613 sshfs: Connection reset by peer]
 
* old Forum thread: [https://bbs.archlinux.org/viewtopic.php?id=27613 sshfs: Connection reset by peer]
 
* make sure your user can log into the server (especially when using AllowUsers)
 
* make sure your user can log into the server (especially when using AllowUsers)
  +
* Make sure {{ic|Subsystem sftp /usr/lib/ssh/sftp-server}} is enabled in {{ic|/etc/ssh/sshd_config}}.
   
 
{{Note| When providing more than one option for sshfs, they must be comma separated. Like so: '{{ic|sshfs -o sshfs_debug,IdentityFile<nowiki>=</nowiki></path/to/key> user@server ...}}')}}
 
{{Note| When providing more than one option for sshfs, they must be comma separated. Like so: '{{ic|sshfs -o sshfs_debug,IdentityFile<nowiki>=</nowiki></path/to/key> user@server ...}}')}}
197行目: 194行目:
   
 
If you experience remote folders not displaying, getting kicked back to the home directory, or other remote file access issues through Thunar, replace fam with {{Pkg|gamin}}. Gamin is derived from fam.
 
If you experience remote folders not displaying, getting kicked back to the home directory, or other remote file access issues through Thunar, replace fam with {{Pkg|gamin}}. Gamin is derived from fam.
  +
  +
=== アプリがフリーズする (例: Nautilus, Gedit) ===
  +
{{Note|下記の設定をすると最近使用したファイルのリストが作られなくなります。また、書き込みエラーが発生することがあります。}}
  +
  +
アプリケーションがフリーズする (反応しなくなる) 場合、{{ic|~/recently-used.xbel}} の書き込み権限を無効化する必要があるかもしれません:
  +
  +
# chattr +i /home/USERNAME/.local/share/recently-used.xbel
  +
  +
詳しくは次の [https://bugs.archlinux.org/task/40260 バグレポート] を見て下さい。
   
 
=== sshfs をマウントされているときにシャットダウンでフリーズ ===
 
=== sshfs をマウントされているときにシャットダウンでフリーズ ===

2015年10月31日 (土) 16:53時点における版

関連記事

sshfs を使うことで (SSH でアクセスできる) リモートシステムをローカルフォルダにマウントすることができます。ツールを使ってマウントしたファイルを様々に操作することが可能です (コピー、名前を変更、vim で編集など)。基本的に shfs の代わりに sshfs を使うことが推奨されます。shfs の新しいバージョンは2004年からリリースされていません。

インストール

公式リポジトリから sshfsインストールしてください。

マウント

ヒント: Google Authenticator を使うことで sshfs のセキュリティを向上させることができます。

ディレクトリをマウントする前に、対象のディレクトリのファイルパーティションが正しく設定されているか (ユーザーがアクセスできるか) 確認してください。マウントするには、sshfs を実行してリモートディレクトリをマウントします:

$ sshfs USERNAME@HOSTNAME_OR_IP:/REMOTE_PATH LOCAL_MOUNT_POINT SSH_OPTIONS

例:

$ sshfs sessy@mycomputer:/remote/path /local/path -C -p 9876 -o allow_other

-p 9876 はポート番号、-C は圧縮の使用、-o allow_other は root 以外のユーザーの読み書きの許可です。

ノート: -p スイッチを使うのが面倒な場合、~/.ssh/config でホストごとに非標準ポートを定義することもできます。詳しくは Secure Shell#ssh の設定に接続データを保存する を参照。

必要であれば、SSH はパスワードを尋ねます。何度もパスワードを入力したくない場合は、次を読んでください: How to Use RSA Key Authentication with SSH または SSH 鍵

ヒント: To quickly mount a remote dir, do some file-management and unmount it, put this in a script:
sshfs USERNAME@HOSTNAME_OR_IP:/REMOTE_PATH LOCAL_MOUNT_POINT SSH_OPTIONS
mc LOCAL_MOUNT_POINT
fusermount -u LOCAL_MOUNT_POINT

This will mount the remote directory, launch MC, and unmount it when you exit.

アンマウント

リモートシステムをアンマウントするには:

$ fusermount -u LOCAL_MOUNT_POINT

例:

$ fusermount -u /mnt/sessy

Chroot

(特定の) ユーザーをディレクトリに閉じ込めたい場合、/etc/ssh/sshd_config を編集してください:

/etc/ssh/sshd_config
.....
Match User someuser 
       ChrootDirectory /chroot/%u
       ForceCommand internal-sftp #to restrict the user to sftp only
       AllowTcpForwarding no
       X11Forwarding no
.....
ノート: The chroot directory must be owned by root, otherwise you will not be able to connect. For more info check the manpages for Match, ChrootDirectory and ForceCommand.

ヘルパー

sshfs ファイルシステムを頻繁にマウントする必要がある場合、sftpman などの sshfs ヘルパーを使うと良いでしょう。

コマンドラインと GTK のフロントエンドが入っており、マウントやアンマウントをワンクリックで行うことができるようになります。

自動マウント

起動時や、必要に応じて (ディレクトリのアクセス時に)、自動マウントを行うことができます。どちらにしても、セットアップは /etc/fstab で行います。

ノート: 自動マウントは root ユーザーによって行われるため、h通常ユーザーの .ssh/config で設定した Hosts は使えなくなります。root ユーザーで通常ユーザーの SSH 鍵を使うときは、IdentityFile オプションにフルパスを指定してください。そして、ホストの署名が .ssh/known_hosts ファイルに追加されるように root で一度は手動で sshfs マウントを使用します。

必要に応じてマウント

/etc/fstab エントリを使うことで systemd でオンデマンドのマウントを行えます。

例:

user@host:/remote/folder /mount/point  fuse.sshfs noauto,x-systemd.automount,_netdev,users,idmap=user,IdentityFile=/home/user/.ssh/id_rsa,allow_other,reconnect 0 0

ここで重要なマウントオプションは noauto,x-systemd.automount,_netdev です。

  • noauto tells it not to mount at boot
  • x-systemd.automount does the on-demand magic
  • _netdev tells it that it's a network device, not a block device (without it "No such device" errors might happen)
ヒント:

別の方法が2つ存在します。どちらも新しいマウントポイントを追加するのに /etc/fstab を編集する必要がなくなり、(autosshfs が有効になった) 通常ユーザーがアクセスしようとしただけで作成されます (例: ls ~/mnt/ssh/[user@]yourremotehost[:port]):

  • autosshfs-gitAUR は AutoFS を使います。autosshfs-user で使用するユーザーを有効にする必要があります。
  • afuseAUR は FUSE ファイルシステムによる多目的のユーザー空間自動マウントツールです。sshfs でも上手く動作します。ユーザーの有効化は必要ありません。実行例: afuse -o mount_template='sshfs -o ServerAliveInterval=10 -o reconnect %r:/ %m' -o unmount_template='fusermount -u -z %m' ~/mnt/ssh

起動時にマウント

/etc/fstab で sshfs を使ってリモートのファイルシステムをマウントする例:

USERNAME@HOSTNAME_OR_IP:/REMOTE/DIRECTORY  /LOCAL/MOUNTPOINT  fuse.sshfs  defaults,_netdev  0  0

fstab の行の例:

llib@192.168.1.200:/home/llib/FAH  /media/FAH2  fuse.sshfs  defaults,_netdev  0  0

ユーザーの SSH 鍵を使っている場合、自動的に動作するようになります。SSH 鍵を見て下さい。

複数のユーザーで sshfs を使いたい場合:

user@domain.org:/home/user  /media/user   fuse.sshfs    defaults,allow_other,_netdev    0  0

マウントする前にネットワークが有効になっていることを確認するために _netdev マウントオプションを設定することが重要です。

ユーザーアクセスのセキュア化

/etc/fstab で自動マウントする場合、ファイルシステムは基本的に root によってマウントされます。デフォルトでは、通常ユーザーとしてアクセスして他のユーザーのアクセスを制限したいときに予期しない結果を招くことがあります。

マウントポイントの設定例:

USERNAME@HOSTNAME_OR_IP:/REMOTE/DIRECTORY  /LOCAL/MOUNTPOINT  fuse.sshfs noauto,x-systemd.automount,_netdev,user,idmap=user,transform_symlinks,identityfile=/home/USERNAME/.ssh/id_rsa,allow_other,default_permissions,uid=USER_ID_N,gid=USER_GID_N 0 0

オプションの説明:

  • allow_other - Allow other users than the mounter (i.e. root) to access the share.
  • default_permissions - Allow kernel to check permissions, i.e. use the actual permissions on the remote filesystem. This allows prohibiting access to everybody otherwise granted by allow_other.
  • uid, gid - set reported ownership of files to given values; uid is the numeric user ID of your user, gid is the numeric group ID of your user.

オプション

sshfs はローカル・リモートのユーザー ID を自動的に変換することができます。

Add the idmap option with user value to translate UID of connecting user:

# sshfs -o idmap=user sessy@mycomputer:/home/sessy /mnt/sessy -C -p 9876

This will map UID of the remote user "sessy" to the local user, who runs this process ("root" in the above example) and GID remains unchanged. If you need more precise control over UID and GID translation, look at the options idmap=file and uidfile and gidfile.

トラブルシューティング

チェックリスト

Read the SSH Checklist Wiki entry first. Further issues to check are:

1. Is your SSH login sending additional information from server's /etc/issue file e.g.? This might confuse SSHFS. You should temporarily deactivate server's /etc/issue file:

$ mv /etc/issue /etc/issue.orig

2. Keep in mind that most SSH related troubleshooting articles you will find on the web are not Systemd related. Often /etc/fstab definitions wrongly begin with sshfs#user@host:/mnt/server/folder ... fuse ... instead of using the syntax user@host:/mnt/server/folder ... fuse.sshfs ... x-systemd, ....

3. Check that the owner of server's source folder and content is owned by the server's user.

$ chown -R USER_S: /mnt/servers/folder

4. The server's user ID can be different from the client's one. Obviously both user names have to be the same. You just have to care for the client's user IDs. SSHFS will translate the UID for you with the following mount options:

uid=USER_C_ID,gid=GROUP_C_ID

5. Check that the client's target mount point (folder) is owned by the client user. This folder should have the same user ID as defined in SSHFS's mount options.

$ chown -R USER_C: /mnt/client/folder

6. Check that the client's mount point (folder) is empty. By default you can't mount SSHFS folders to non-empty folders.

7. If you want to automount SSH shares by using an SSH public key authentication (no password) via /etc/fstab, you can use this line as an example:

USER_S@SERVER:/mnt/on/server      /nmt/on/client        fuse.sshfs      x-systemd.automount,_netdev,user,idmap=user,transform_symlinks,identityfile=/home/USER_C/.ssh/id_rsa,allow_other,default_permissions,uid=USER_C_ID,gid=GROUP_C_ID,umask=0   0 0

Considering the following example settings ...

SERVER = Server host name (serv) USER_S = Server user name (pete) USER_C = Client user name (pete) USER_S_ID = Server user ID (1004) USER_C_ID = Client user ID (1000) GROUP_C_ID = Client user's group ID (100)

you get the client user's ID and group ID with

$ id USERNAME

this is the final SSHFS mount row in /etc/fstab;

pete@serv:/mnt/on/server      /nmt/on/client        fuse.sshfs      x-systemd.automount,_netdev,user,idmap=user,transform_symlinks,identityfile=/home/pete/.ssh/id_rsa,allow_other,default_permissions,uid=1004,gid=1000,umask=0   0 0

8. If you know another issue for this checklist please add it the list above.

Connection reset by peer

  • If you are trying to access the remote system with a hostname, try using its IP address, as it can be a domain name solving issue. Make sure you edit /etc/hosts with the server details.
  • If you are using non-default key names and are passing it as -i .ssh/my_key, this won't work. You have to use -o IdentityFile=/home/user/.ssh/my_key, with the full path to the key.
  • Adding the option 'sshfs_debug' (as in 'sshfs -o sshfs_debug user@server ...') can help in resolving the issue.
  • If that doesn't reveal anything useful, you might also try adding the option debug.
  • If you're trying to sshfs into a router running DD-WRT or the like, there is a solution here. (note that the -osftp_server=/opt/libexec/sftp-server option can be used to the sshfs command in stead of patching dropbear)
  • old Forum thread: sshfs: Connection reset by peer
  • make sure your user can log into the server (especially when using AllowUsers)
  • Make sure Subsystem sftp /usr/lib/ssh/sftp-server is enabled in /etc/ssh/sshd_config.
ノート: When providing more than one option for sshfs, they must be comma separated. Like so: 'sshfs -o sshfs_debug,IdentityFile=</path/to/key> user@server ...')

Remote host has disconnected

sshfs を使おうとした直後にこのメッセージが表示される場合:

  • まずリモートマシンに sftp がインストールされていることを確認してください。インストールしていないと、動作しません。
ヒント: If your remote server is running OpenWRT: opkg install openssh-sftp-server will do the trick
  • Then, try checking the path of the Subsystem listed in /etc/ssh/sshd_config on the remote machine to see, if it is valid. You can check the path to it with find / -name sftp-server.

Arch Linux では /etc/ssh/sshd_config のデフォルト値は Subsystem sftp /usr/lib/ssh/sftp-server です。

Thunar has issues with FAM and remote file access

If you experience remote folders not displaying, getting kicked back to the home directory, or other remote file access issues through Thunar, replace fam with gamin. Gamin is derived from fam.

アプリがフリーズする (例: Nautilus, Gedit)

ノート: 下記の設定をすると最近使用したファイルのリストが作られなくなります。また、書き込みエラーが発生することがあります。

アプリケーションがフリーズする (反応しなくなる) 場合、~/recently-used.xbel の書き込み権限を無効化する必要があるかもしれません:

# chattr +i /home/USERNAME/.local/share/recently-used.xbel

詳しくは次の バグレポート を見て下さい。

sshfs をマウントされているときにシャットダウンでフリーズ

sshfs を手動でマウントして、シャットダウン前にアンマウントしていなかった場合、systemd がシャットダウン時にフリーズすることがあります。この問題を解決するには、以下のファイルを (root で) 作成してください:

/etc/systemd/system/killsshfs.service
[Unit]
After=network.target

[Service]
RemainAfterExit=yes
ExecStart=-/bin/true
ExecStop=-/usr/bin/pkill sshfs

[Install]
WantedBy=multi-user.target

そしてサービスを有効化します: systemctl enable killsshfs.service

参照