「TrueCrypt」の版間の差分

提供: ArchWiki
ナビゲーションに移動 検索に移動
(同期)
 
(2人の利用者による、間の4版が非表示)
1行目: 1行目:
[[Category:セキュリティ]]
+
[[Category:暗号化]]
 
[[Category:ファイルシステム]]
 
[[Category:ファイルシステム]]
 
[[de:TrueCrypt]]
 
[[de:TrueCrypt]]
8行目: 8行目:
 
{{Related|Tomb}}
 
{{Related|Tomb}}
 
{{Related articles end}}
 
{{Related articles end}}
  +
{{Warning|
 
{{Warning|2014年5月から、TrueCrypt の開発は中止され [http://truecrypt.sourceforge.net/ もはやアップデートや修正は行われない] ことになっています。[[dm-crypt]] や [[tcplay]] など他の暗号化プログラムを使用すようにしてくださ。ただし、[http://truecrypt.ch/ Truecrypt のフォーク] が計画されているようです。開発中止関するあらましは [https://www.grc.com/misc/truecrypt/truecrypt.htm] を参照してください。他の TrueCrypt フォークである [http://veracrypt.codeplex.com/ VeraCrypt] は開発を継続しいます: VeraCrypt は [[AUR]] の {{AUR|veracrypt}} でインストールできます。VeraCrypt のストレージフォーマットはバージョン 1.0f から TrueCrypt のストレージフォーマットと互換性を持つようになっています。}}
+
* 2014年5月から、TrueCrypt の開発は中止され [http://truecrypt.sourceforge.net/ もはやアップデートや修正は行われない] ことになっています。[[dm-crypt]] や [[tcplay]] など他の暗号化プログラムるい TrueCrypt のフォークを使用するようにしてください。例えば [http://veracrypt.codeplex.com/ VeraCrypt] は活発に開発されおり {{Pkg|veracrypt}} パッケージでインストールできます。VeraCrypt のストレージフォーマットはバージョン 1.0f から TrueCrypt のストレージフォーマットと互換性を持つようになっています。TrueCrypt のコードの監査については [https://www.grc.com/misc/truecrypt/truecrypt.htm] を参照。
  +
* 2015年9月26日に TrueCrypt の '''Windows''' 版に深刻なセキュリティ問題が2つ発見されました: CVE-2015-7358 と CVE-2015-7359。Windows と Arch Linux で暗号化ボリュームを共有する場合は注意してください。詳しくは [https://veracrypt.codeplex.com/SourceControl/changeset/cf4794372e5dea753b6310f1ca6912c6bfa86d45 1][http://www.theregister.co.uk/2015/09/29/google_flaks_find_admin_elevation_holes_that_gave_truecrypt_audit_the_slip/ 2] を参照。}}
   
 
TrueCrypt はフリーでオープンソースのオンザフライ暗号化 (OTFE) プログラムです。TrueCrypt の機能として以下があります:
 
TrueCrypt はフリーでオープンソースのオンザフライ暗号化 (OTFE) プログラムです。TrueCrypt の機能として以下があります:
21行目: 22行目:
 
== インストール ==
 
== インストール ==
   
{{Note|For opening and accessing an existing TrueCrypt container [[#Accessing a TrueCrypt container using cryptsetup|cryptsetup]] is the preferred way, since it is well integrated with the rest of the system. Creating a new TrueCrypt container can be done using {{ic|truecrypt}}, after which it can be opened using {{ic|cryptsetup}}.}}
+
{{Note|既存の TrueCrypt コンテナを開いてアクセスしたいときは [[#cryptsetup を使って TrueCrypt コンテナにアクセス|cryptsetup]] を使用することを推奨します。新しい TrueCrypt コンテナは {{ic|truecrypt}} で作成できます。}}
   
[[公式リポジトリ]]から {{Pkg|truecrypt}} を[[pacman|インストール]]してください。{{Pkg|linux}} 以外のカーネルを使っている場合は、適当なカーネルモジュールもインストールします。
+
{{Pkg|truecrypt}} パッケージを[[pacman|インストール]]してください。{{Pkg|linux}} 以外のカーネルを使っている場合は、適当なカーネルモジュールもインストールします。
   
 
truecrypt を使って仮想ファイルシステム (例: ファイル) を暗号化する場合は、''truecrypt'' コマンドを実行したときに自動でモジュールがロードされます。
 
truecrypt を使って仮想ファイルシステム (例: ファイル) を暗号化する場合は、''truecrypt'' コマンドを実行したときに自動でモジュールがロードされます。
33行目: 34行目:
   
 
{{Note|
 
{{Note|
  +
* 上記の設定でうまくいかない場合、以下のように "loop" モジュールを追加することで動作します:
* This didn't work for me (module truecrypt seems to be non-existent now), but adding "loop" module worked
 
 
# tee /etc/modules-load.d/truecrypt.conf <<< "loop"
 
# tee /etc/modules-load.d/truecrypt.conf <<< "loop"
 
# modprobe loop
 
# modprobe loop
  +
* Arch の標準カーネルではモジュールのロードは必ずしも手動で行う必要はありません。ただし、カスタムカーネルを使用している場合は '''FUSE''' と '''loop'''、および使用する暗号化アルゴリズム (例: '''AES''', '''XTS''', '''SHA512''') を有効化する必要があります。既存の TrueCrypt コンテナにアクセスするだけなら TrueCrypt のインストールは不要です。
* It does not appear that loading a module applies with TrueCrypt 7.1a, the current version in Arch as of 4/19/2013. The above advice may be outdated with respect to the module, however it is still important to enable '''FUSE''', '''loop''' and your encryption algorithm (e.g. '''AES''', '''XTS''', '''SHA512''') in custom kernels.
 
If you only want to open and access an existing truecrypt container, this can also be done with {{ic|cryptsetup}} i.e. without installing Truecrypt.
 
 
}}
 
}}
   
 
== cryptsetup を使って TrueCrypt コンテナにアクセス ==
 
== cryptsetup を使って TrueCrypt コンテナにアクセス ==
   
バージョン 1.6 から、{{Pkg|cryptsetup}} は TrueCrypt コンテナをネイティブで開けるようになっており、{{Pkg|truecrypt}} パッケージを必要としません。cryptsetup でコンテナを開くには、次のコマンドを実行してください:
+
バージョン 1.6 から、{{Pkg|cryptsetup}} は TrueCrypt と VeraCrypt のコンテナをネイティブで開けるようになっており、{{Pkg|truecrypt}} や {{Pkg|veracrypt}} パッケージを必要としません。cryptsetup でコンテナを開くには、次のコマンドを実行してください:
$ cryptsetup --type tcrypt open container-to-mount container-name
+
# cryptsetup --type tcrypt open container-to-mount container-name
  +
  +
{{ic|container-to-mount}} を開きたい {{ic|/dev}} 下のデバイスファイルやファイルのパスに置き換えてください。コンテナが開かれると {{ic|/dev/mapper/container-name}} というデバイスが新しく認識され、通常のデバイスと同じように {{ic|mount}} できるようになります。
   
  +
VeraCrypt コンテナをマウントしたいときは、{{ic|--type tcrypt}} に加えて {{ic|--veracrypt}} オプションを使ってください。カスタム Personal Iteration Multiplier (PIM) を使用する場合、{{ic|--veracrypt-query-pim}} オプションを使ってください。
Replace {{ic|container-to-mount}} with the device file under {{ic|/dev}} or the path to the file you wish to open. Upon successful opening, the plaintext device will appear as {{ic|/dev/mapper/container-name}}, which you can {{ic|mount}} like any normal device.
 
   
  +
キーファイルを使用する場合、{{ic|--key-file}} オプションを使ってファイルを指定してください。隠しボリュームを開く場合は {{ic|--tcrypt-hidden}} オプションを使ってください。システムモードで暗号kパされたパーティションあるいはデバイスを開くには {{ic|--tcrypt-system}} オプションを使ってください。
If you are using key files, supply them using the {{ic|--key-file}} option, to open a hidden volume, supply the {{ic|--tcrypt-hidden}} option and for a partition or whole drive that is encrypted in system mode use the {{ic|--tcrypt-system}} option.
 
   
サポートされているオプションなどの詳細は {{ic|man cryptsetup}} を見て下さい。
+
サポートされているオプションなどの詳細は {{man|8|cryptsetup}} を見て下さい。
   
 
=== /etc/crypttab を使って自動マウント ===
 
=== /etc/crypttab を使って自動マウント ===
55行目: 57行目:
 
バージョン 206 から、[[systemd]] は {{ic|/etc/crypttab}} を使用して起動時に TrueCrypt コンテナを (自動的に) マウントすることをサポートしています。
 
バージョン 206 から、[[systemd]] は {{ic|/etc/crypttab}} を使用して起動時に TrueCrypt コンテナを (自動的に) マウントすることをサポートしています。
   
  +
以下のセットアップでは {{ic|/mnt/truecrypt-volume}} にアクセスしたら systemd によって自動的にシステム暗号化モードで {{ic|/dev/sda2}} がマウントされます。ボリュームを開くためのパスフレーズは {{ic|/etc/volume.password}} に記述します。自動マウントを使用するには {{ic|/etc/fstab}} に指定するデバイスファイルは {{ic|/dev/mapper/}} のものでなくてはなりません。{{ic|/dev/disk/by-uuid/}} などは使えません。以下のように {{ic|/dev/disk/}} のデバイスファイル名を使うことで {{ic|/etc/crypttab}} の中で暗号化ボリュームを問題なく識別できます:
The following example setup will mount {{ic|/dev/sda2}} in system encryption mode as soon as {{ic|/mnt/truecrypt-volume}} is accessed using systemd's automounting logic. The passphrase to open the volume is given in {{ic|/etc/volume.password}}. Note that the device file given in {{ic|/etc/fstab}} needs to be the one from {{ic|/dev/mapper/}} and not, for example, from {{ic|/dev/disk/by-uuid/}} for automounting logic to kick in. Other than that you can still reliably identify the encrypted volume itself inside of {{ic|/etc/crypttab}} using device file names from {{ic|/dev/disk/}}.
 
   
 
{{hc|/etc/crypttab|<nowiki>
 
{{hc|/etc/crypttab|<nowiki>
61行目: 63行目:
 
}}
 
}}
   
For a standard truecrypt volume, use ''tcrypt'' instead of ''tcrypt-system''. And for a hidden one, use ''tcrypt-hidden''.
+
標準の truecrypt ボリュームの場合、''tcrypt-system'' の代わりに ''tcrypt'' を使ってください。隠しボリュームの場合、''tcrypt-hidden'' を使ってください。
   
 
{{hc|/etc/fstab|<nowiki>
 
{{hc|/etc/fstab|<nowiki>
67行目: 69行目:
 
}}
 
}}
   
  +
''auto'' のかわりに直接、ファイルシステムやマウントオプションを指定することもできます。[[NTFS]] を通常ユーザーでマウントする場合などで有用です。
Instead of ''auto'', you can put directly your filesystem, and put usual mount options. It is useful with NTFS for mounting as a normal user.
 
   
  +
サポートされているオプションなどの詳細は {{man|5|crypttab}} を参照してください。
See {{ic|man crypttab}} for more details and options supported.
 
   
 
== ファイルを仮想ボリュームとして暗号化 ==
 
== ファイルを仮想ボリュームとして暗号化 ==
   
  +
以下では仮想ファイルシステムとして扱えるファイルを作成します。ファイルをマウントすれば暗号化ファイルの中にファイルを保存することが可能です。口座の情報やパスワードなど機密情報をシングルファイルに保存して Linux, Windows, macOS などからアクセスできるようにしたい場合に有用です。
The following instructions will create a file that will act as a virtual filesystem, allowing you to mount it and store files within the encrypted file. This is a convenient way to store sensitive information, such as financial data or passwords, in a single file that can be accessed from Linux, Windows, or Macs.
 
   
  +
新しい truecrypt ファイルをインタラクティブに作成するには、ターミナルに以下のコマンドを入力:
To create a new truecrypt file interactively, type the following in a terminal:
 
$ truecrypt -t -c
+
# truecrypt -t -c
   
  +
指示に従ってファイルを作成できます。設定がよくわからない場合はデフォルトの値を使ってください:
Follow the instructions, choosing the default values unless you know what you are doing:
 
   
 
Volume type:
 
Volume type:
84行目: 86行目:
 
2) Hidden
 
2) Hidden
 
Select [1]: 1
 
Select [1]: 1
  +
 
 
Enter file or device path for new volume: /home/user/''EncryptedFile''.tc
 
Enter file or device path for new volume: /home/user/''EncryptedFile''.tc
  +
 
 
Enter volume size (bytes - size/sizeK/sizeM/sizeG): 32M
 
Enter volume size (bytes - size/sizeK/sizeM/sizeG): 32M
  +
 
 
Encryption algorithm:
 
Encryption algorithm:
 
1) AES
 
1) AES
102行目: 104行目:
 
11) Twofish-Serpent
 
11) Twofish-Serpent
 
Select [1]: 1
 
Select [1]: 1
  +
 
 
Hash algorithm:
 
Hash algorithm:
 
1) RIPEMD-160
 
1) RIPEMD-160
108行目: 110行目:
 
3) Whirlpool
 
3) Whirlpool
 
Select [1]: 1
 
Select [1]: 1
  +
 
Filesystem:
+
Filesystem:
1) None
+
1) None
2) FAT
+
2) FAT
3) Linux Ext2
+
3) Linux Ext2
4) Linux Ext3
+
4) Linux Ext3
5) Linux Ext4
+
5) Linux Ext4
Select [2]:
+
Select [2]: 2
  +
 
 
Enter password for new volume '/home/user/''EncryptedFile''.tc': *****************************
 
Enter password for new volume '/home/user/''EncryptedFile''.tc': *****************************
 
Re-enter password: *****************************
 
Re-enter password: *****************************
  +
 
 
Enter keyfile path [none]:
 
Enter keyfile path [none]:
  +
 
 
Please type at least 320 randomly chosen characters and then press Enter:
 
Please type at least 320 randomly chosen characters and then press Enter:
  +
 
 
Done: 32.00 MB Speed: 10.76 MB/s Left: 0:00:00
 
Done: 32.00 MB Speed: 10.76 MB/s Left: 0:00:00
 
Volume created.
 
Volume created.
   
  +
新しい暗号化ファイルは既存のディレクトリにマウントできます:
You can now mount the new encrypted file to a previously-created directory:
 
$ truecrypt -t /home/user/''EncryptedFile''.tc /home/user/''EncryptedFileFolder''
+
# truecrypt -t /home/user/''EncryptedFile''.tc /home/user/''EncryptedFileFolder''
 
{{Note|Truecrypt requires root privileges and as such, running the above command as a user will attempt to use '''sudo''' for authentication. To work with files as a regular user, please see[[#Mount volumes as a normal user|Mount volumes as a normal user]].}}
 
 
Once mounted, you can copy or create new files within the encrypted directory as if it was any normal directory. When you are you ready to re-encrypt the contents and unmount the directory, run:
 
$ truecrypt -t -d
 
   
  +
{{Note|Truecrypt は root 権限を必要とします。通常ユーザーでファイルを使いたい場合は[[#通常ユーザーでボリュームをマウント|通常ユーザーでボリュームをマウント]]を参照してください。}}
Again, this will require administrator privileges through the use of '''sudo'''. After running it check if the files that are to be encrypted are indeed no longer in the directory. (might want to try unimportant data first) If they are still there, note that ''rm'' doesn't make the data unrecoverable.
 
   
  +
マウントしたら、通常のディレクトリと同じように暗号化ディレクトリの中に新しいファイルをコピー・作成できます。再度暗号化するにはディレクトリをアンマウントします:
For more information about truecrypt in general, run:
 
$ man truecrypt
+
# truecrypt -t -d
{{Note|As of 1:7.1a-1 dont see a man or info page.}}
 
   
  +
上記のコマンドは管理者権限を必要とします。アンマウントしたら暗号化されたファイルがディレクトリから消えているかどうか確認してください (重要でないデータから試してみると良いでしょう)。
Several options can be passed at the command line, making automated access and creation a simple task. The man page is highly recommended reading.
 
   
 
== 物理ボリュームの暗号化 ==
 
== 物理ボリュームの暗号化 ==
   
  +
{{Note|1=グラフィカルインターフェイスで問題が起こる場合、{{ic|-t}} フラグを使って CLI モードで起動してみてください。}}
{{Note|1= If you are having problems with the graphical interface, you can run in CLI mode with the -t flag.}}
 
   
 
キーファイルを使いたい場合は、次のコマンドでファイルを作成します:
 
キーファイルを使いたい場合は、次のコマンドでファイルを作成します:
truecrypt --create-keyfile /etc/disk.key
+
# truecrypt --create-keyfile /etc/disk.key
 
デフォルトでは、ボリュームを解錠するにはパスフレーズとキーの両方が必要になります。
 
デフォルトでは、ボリュームを解錠するにはパスフレーズとキーの両方が必要になります。
   
179行目: 175行目:
 
# truecrypt -N 1 /dev/sda1
 
# truecrypt -N 1 /dev/sda1
   
  +
外殻ボリュームの空き領域に truecrypt の隠しボリュームを作成:
Create a hidden truecrypt volume in the free space of the outer volume:
 
# truecrypt --type hidden -c /dev/sda1
+
# truecrypt --type hidden -c /dev/sda1
  +
外殻ボリュームとは異なるパスフレーズまたはキーファイルを使う必要があります。
You need to use another passphrase and/or keyfile here than the one you used for the outer volume.
 
   
  +
外殻 truecrypt ボリュームをアンマップして隠しボリュームをマップ:
Unmap the outer truecrypt volume and map the hidden one:
 
 
# truecrypt -d /dev/sda1
 
# truecrypt -d /dev/sda1
 
# truecrypt -N 1 /dev/sda1
 
# truecrypt -N 1 /dev/sda1
  +
隠しボリューム用のパスフレーズを使ってください。TrueCrypt は自動的にパスフレーズを選び取ります。
Just use the passphrase you chose for the hidden volume and TrueCrypt will automatically choose it before the outer.
 
   
  +
ファイルシステムを作成してマウント:
Create a file system on it (if you have not already) and mount it:
 
 
# mkfs.ext4 /dev/mapper/truecrypt1
 
# mkfs.ext4 /dev/mapper/truecrypt1
 
# mount /dev/mapper/truecrypt1 /media/disk
 
# mount /dev/mapper/truecrypt1 /media/disk
   
  +
書き込み保護を有効にして外殻ボリュームをマップ・マウント:
Map and mount the outer volume with the hidden write-protected:
 
truecrypt -P /dev/sda1 /media/disk
+
# truecrypt -P /dev/sda1 /media/disk
 
== 特殊なファイルシステムのマウント ==
 
 
{{Note|Current Versions of truecrypt seem to support NTFS write support by default so the {{ic|--filesystem}} flag no longer seems to be necessary.}}
 
 
In the following example I want to mount a ntfs-volume, but TrueCrypt does not use ''ntfs-3g by'' default (so there is no write access; checked in version 6.1).
 
The following command works for me:
 
truecrypt --filesystem=ntfs-3g --mount /file/you/want/to/mount
 
You may also want to mount ntfs volume without execute flag on all files
 
truecrypt --filesystem=ntfs-3g --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002
 
   
 
== fstab でボリュームをマウント ==
 
== fstab でボリュームをマウント ==
   
  +
まず最初に、fstab でマウントを処理するスクリプトを書く必要があります。以下を {{ic|/usr/bin/mount.truecrypt}} として保存してください:
First of all, we need to write a script which will handle the way mounting via fstab is done. Place the following in {{ic|/usr/bin/mount.truecrypt}}:
 
 
{{bc|<nowiki>
 
{{bc|<nowiki>
 
#!/bin/sh
 
#!/bin/sh
231行目: 217行目:
 
/bin/truecrypt --text --non-interactive ${DEV} ${MNTPT} ${TCOPTIONS[*]} --fs-options="${OPTIONS%,*}"
 
/bin/truecrypt --text --non-interactive ${DEV} ${MNTPT} ${TCOPTIONS[*]} --fs-options="${OPTIONS%,*}"
 
</nowiki>}}
 
</nowiki>}}
  +
ファイルに実行可能属性を付与してください:
Also do not forget to make the file executable:
 
   
 
# chmod +x /usr/bin/mount.truecrypt
 
# chmod +x /usr/bin/mount.truecrypt
   
  +
最後に、fstab に以下のようにデバイスを追加してください:
Finally, add the device to fstab somewhat like this:
 
   
 
/dev/sdb3 /mnt truecrypt fs=vfat,defaults 0 0
 
/dev/sdb3 /mnt truecrypt fs=vfat,defaults 0 0
   
{{Tip|This script is also provided by the {{AUR|truecrypt-mount}} package.}}
+
{{Tip|上記のスクリプトは {{AUR|truecrypt-mount}} パッケージでもインストールできます。}}
   
 
== 通常ユーザーでボリュームをマウント ==
 
== 通常ユーザーでボリュームをマウント ==
   
  +
TrueCrypt を使うには root 権限が必要です。このセクションでは通常ユーザーにボリュームへの書き込み権限を与えて、通常ユーザーが TrueCrypt を使えるようにする方法を説明します。
TrueCrypt needs root privileges to work: this procedure will allow normal users to use it, also giving writing permissions to mounted volumes.
 
   
以下のどちらの方法でも [[Sudo]] が必要になります。先に進む前に sudo を設定するようにしてください。
+
以下のどちらの方法でも [[sudo]] が必要になります。先に進む前に sudo を設定するようにしてください。
   
 
=== 方法 1: truecrypt グループを追加 ===
 
=== 方法 1: truecrypt グループを追加 ===
   
  +
truecrypt という名前の新しいグループを作成して必要な権限を与えます。グループに属しているユーザーは TrueCrypt を使えるようになります。
Create a new group called truecrypt and give it the necessary permissions. Any users that belongs to that group, will be able to use TrueCrypt.
 
 
# groupadd truecrypt
 
# groupadd truecrypt
   
  +
sudo の設定を編集:
Edit the sudo configuration:
 
 
# visudo
 
# visudo
   
  +
sudo の設定ファイルの末尾に以下の行を追加:
Append the following lines at the bottom of the sudo configuration file:
 
 
# Users in the truecrypt group are allowed to run TrueCrypt as root.
 
# Users in the truecrypt group are allowed to run TrueCrypt as root.
 
%truecrypt ALL=(root) NOPASSWD:/usr/bin/truecrypt
 
%truecrypt ALL=(root) NOPASSWD:/usr/bin/truecrypt
   
  +
使用するユーザーを truecrypt グループに追加:
You can now add your users to the truecrypt group:
 
 
# gpasswd -M first_user,second_user,etc truecrypt
 
# gpasswd -M first_user,second_user,etc truecrypt
   
  +
{{Note|上記の変更を適用するには、ユーザーを一度ログアウトさせてから再ログインする必要があります。}}
{{Note|In order to make these changes active, any user that has been added to the truecrypt group have to logout.}}
 
   
  +
その後、以下のコマンドでデバイスをマウントすることができます:
After that, you can mount your device by
 
   
# truecrypt --mount ''/path/to/device'' ''/path/to/mountpoint''
+
$ truecrypt --mount ''/path/to/device'' ''/path/to/mountpoint''
   
  +
デフォルトのマウントポイントは {{ic|/media/truecrypt1}} です。通常、{{ic|--filesystem}} フラグを使ってデバイスのファイルシステムを明示的に指定する必要はありません。
Default mountpoint is {{ic|/media/truecrypt1}}. Normally, it is not necessary to explicitly specify the filesystem of your device using the {{ic|--filesystem}} flag.
 
   
  +
truecrypt にはパーミッションマスクを指定すると良いでしょう。そうしないと、マウントしたデバイスの全てのファイルが実行可能になってしまいます。例:
It is definitely reasonable to give truecrypt some permission masks. Otherwise, every file on your mounted device will be executable. So instead of the above, you can use
 
   
# truecrypt --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002 --mount /PATH/TO/DEVICE /PATH/TO/MOUNTPOINT
+
$ truecrypt --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002 --mount /PATH/TO/DEVICE /PATH/TO/MOUNTPOINT
   
and add this line to your bash configuration file, {{ic|~/.bashrc}} as an alias:
+
上記のコマンドは bash の設定ファイル ({{ic|~/.bashrc}}) などにエイリアスとして追加できます:
   
 
alias tc1='truecrypt --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002 --mount ''/path/to/device"" ''/path/to/mountpoint'
 
alias tc1='truecrypt --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002 --mount ''/path/to/device"" ''/path/to/mountpoint'
   
  +
指定したデバイスをマウントするには、通常ユーザーで以下のコマンドを使用します:
To mount this specific device, use
 
   
# tc1
+
$ tc1
   
  +
=== 方法 2: sudo の簡易化 ===
as a normal user.
 
   
  +
パスワードを入力せずに truecrypt を実行できるようにしたい場合、以下のコマンドを実行:
=== 方法 2: sudo simplified ===
 
 
Simply enable desired user to run truecrypt without a password:
 
 
# visudo
 
# visudo
   
  +
そして以下を追加:
Append the following:
 
 
USERNAME ALL = (root) NOPASSWD:/usr/bin/truecrypt
 
USERNAME ALL = (root) NOPASSWD:/usr/bin/truecrypt
   
  +
もしくは wheel グループを使用する場合:
alternatively, if you make use of the wheel group:
 
 
%wheel ALL = (root) NOPASSWD:/usr/bin/truecrypt
 
%wheel ALL = (root) NOPASSWD:/usr/bin/truecrypt
   
  +
通常ユーザーのパーミッションが困る場合、truecrypt のマウントコマンドに {{ic|-u}} フラグを追加してください。例:
If you have any difficulties with permissions as a normal user, just add the {{ic|-u}} flag to the truecrypt mount command, for example:
 
 
$ truecrypt -u /home/user/''EncryptedFile''.tc /home/user/''EncryptedFileFolder''
 
$ truecrypt -u /home/user/''EncryptedFile''.tc /home/user/''EncryptedFileFolder''
   
 
=== ログイン時に自動マウント ===
 
=== ログイン時に自動マウント ===
   
  +
スタートアップに以下を追加:
Simply add:
 
 
{{bc|
 
{{bc|
$ truecrypt /home/user/''Encrypted File''.tc /home/user/''Encrypted File Folder'' <<EOF
+
truecrypt /home/user/''Encrypted File''.tc /home/user/''Encrypted File Folder'' <<EOF
 
''password''
 
''password''
 
EOF
 
EOF
 
}}
 
}}
to your startup procedure. Do not use the {{ic|-p}} switch, this method is more secure. Otherwise everyone can just look up the password via ''ps'' and similar tools, as it is in the process name! [http://thoughtyblog.wordpress.com/2009/07/05/truecrypt-linux-hide-password-from-ps/ source]
+
{{ic|-p}} スイッチは使わないでください。''ps'' などのツールを使ってプロセスの名前からパスワードを確認できてしまいます [http://thoughtyblog.wordpress.com/2009/07/05/truecrypt-linux-hide-password-from-ps/]
   
 
The most recent truecrypt has a couple of followup questions. If you have expect installed, this will work (assuming no keyfile and no desire to protect hidden volume), saved to a file with root-only perms called from /etc/rc.local:
 
The most recent truecrypt has a couple of followup questions. If you have expect installed, this will work (assuming no keyfile and no desire to protect hidden volume), saved to a file with root-only perms called from /etc/rc.local:
324行目: 308行目:
 
</nowiki>}}
 
</nowiki>}}
   
  +
上記はパスワードを普通に入力するのと比べるとセキュアでありませんが、TrueCrypt のファイルシステムが共有ストレージなどにあるときに、暗号化されないままの状態にするよりはましです。
Of course, this isn't as secure as entering your password manually. But for some use cases, such as when your TrueCrypt filesystem is in a file on shared storage, it's better than being unencrypted.
 
   
 
== (シャットダウン時に) ボリュームを安全にアンマウントしてマップを解除 ==
 
== (シャットダウン時に) ボリュームを安全にアンマウントしてマップを解除 ==
   
  +
以下のコマンドで指定したデバイスをアンマウントできます:
You can unmount a specific device by
 
   
 
# truecrypt -d ''/path/to/mountpoint''
 
# truecrypt -d ''/path/to/mountpoint''
   
  +
全ての truecrypt ボリュームをアンマウントしたい場合はパスを省略してください。
or leave away the path to unmount all truecrypt volumes.
 
   
If you want your truecrypt device to be unmounted automatically at shutdown, add the following to the file {{ic|/etc/rc.local.shutdown}}:
+
シャットダウン時に自動的に truecrypt デバイスをアンマウントさせたい場合、以下を {{ic|/etc/rc.local.shutdown}} ファイルに追加:
   
 
if (/usr/bin/truecrypt --text --list)
 
if (/usr/bin/truecrypt --text --list)
342行目: 326行目:
 
}
 
}
 
fi
 
fi
  +
''sleep'' コマンドは取り払ってもかまいません。実際にシャットダウンする前にアンマウントする猶予を与えているだけです。
You can also leave away the ''sleep'' command, it is just to give the unmounting some time to complete before the actual shutdown.
 
 
[[systemd]] を使用している場合、シャットダウン時に truecrypt で暗号化されたファイルシステムを自動的にアンマウントするサービスが [[systemd/サービス]] のページにあります。
 
   
 
== エラー ==
 
== エラー ==
350行目: 332行目:
 
=== TrueCrypt is already running ===
 
=== TrueCrypt is already running ===
   
If a messagebox ''TrueCrypt is already running'' appears when starting TrueCrypt, check for a hidden file in the home directory of the concerned user called ''.TrueCrypt-lock-username''. Substitute ''username'' with the individual username. Delete the file and start TrueCrypt again.
+
TrueCrypt の起動時に ''TrueCrypt is already running'' というメッセージボックスが表示される場合、ホームディレクトリに ''.TrueCrypt-lock-username'' という名前の隠しファイルが存在しないか確認してください (''username'' はあなたのユーザー名に置き換えて下さい)。ファイルを削除して TrueCrypt を再起動してください。
   
 
=== Deleted stale lockfile ===
 
=== Deleted stale lockfile ===
   
If you always get a message "Delete stale lockfile [....]" after starting Truecrypt, the Truecrypt process with the lowest ID has to be killed during Gnome log out. Edit {{ic|/etc/gdm/PostSession/Default}} and add the following line before exit 0:
+
Truecrypt の起動後に "Delete stale lockfile [....]" というメッセージが表示される場合、GNOME のログアウト時に ID が一番小さい Truecrypt のプロセスを終了する必要があります。{{ic|/etc/gdm/PostSession/Default}} を編集して exit 0 の前に以下の行を追加してください:
 
kill $(ps -ef | grep truecrypt | tr -s ' ' | cut -d ' ' -f 2)
 
kill $(ps -ef | grep truecrypt | tr -s ' ' | cut -d ' ' -f 2)
   
362行目: 344行目:
   
 
(暗号化されていない NTFS パーティションは問題なく扱えるのに) 名前にユニコード文字が含まれているファイルやフォルダが TrueCrypt の NTFS ボリュームで表示されない場合、最初に [[NTFS-3G]] ドライバーがインストールされているかどうか確認してください。そして以下のシンボリックリンクを root で作成してください:
 
(暗号化されていない NTFS パーティションは問題なく扱えるのに) 名前にユニコード文字が含まれているファイルやフォルダが TrueCrypt の NTFS ボリュームで表示されない場合、最初に [[NTFS-3G]] ドライバーがインストールされているかどうか確認してください。そして以下のシンボリックリンクを root で作成してください:
ln -s /sbin/mount.ntfs-3g /sbin/mount.ntfs
+
# ln -s /sbin/mount.ntfs-3g /sbin/mount.ntfs
  +
自動的に NTFS ボリュームで NTFS-3G ドライバーが使われるようになります。コンソールで以下のように指定するのと同じです:
That will cause TrueCrypt to automatically use this driver for NTFS volumes, having the same effect as the explicit use of
 
truecrypt --filesystem=ntfs-3g /path/to/volume
+
# truecrypt --filesystem=ntfs-3g /path/to/volume
via the console.
 
   
  +
TrueCrypt の GUI (''Settings > Preferences > Mount Options'') で以下のオプションを設定できます:
One may also consider setting e.g.:
 
 
rw,noatime
 
rw,noatime
amongst other options in the TrueCrypt GUI (''Settings > Preferences > Mount Options'').
 
   
 
==== FAT ====
 
==== FAT ====
   
  +
同じように、Windows で作成した FAT32 ボリュームは ISO 8859-1 ではなく Unicode が使われることがあります。UTF-8 を使用するには、マウントオプションを設定:
Similarly, FAT32 volumes created using Windows may use Unicode rather than ISO 8859-1. In order to use UTF-8 globally, set the mount option:
 
 
iocharset=utf8
 
iocharset=utf8
   
  +
もしくは、ボリュームをローカルにマウントする際に以下のように指定:
Alternatively, when mounting volumes locally use:
 
 
--fs-options=iocharset=utf8
 
--fs-options=iocharset=utf8
  +
  +
linux-4.14.4 から [https://bugs.archlinux.org/task/56781]、デフォルトで UTF8 文字セットが有効になっているため、ISO 8859-1 エンコーディングを使ってボリュームをマウントするには以下のオプションが必要です:
  +
  +
--fs-options=utf8=no
   
 
=== アンマウントエラー (device mapper) ===
 
=== アンマウントエラー (device mapper) ===
405行目: 389行目:
 
# tee /etc/modules-load.d/truecrypt.conf <<< "loop"
 
# tee /etc/modules-load.d/truecrypt.conf <<< "loop"
   
  +
{{Note|udev 181-5 現在、ループデバイスモジュールは自動ロードされません。上記の設定が必要です。}}
{{Note|As of udev 181-5, the loop device module is no longer auto-loaded, and the procedure described here is necessary.}}
 
   
  +
新しいバージョンのカーネルでは起動時にループデバイスが作成されません。ループデバイスが存在しないと、コンテナファイルのマウントに TrueCrypt が失敗します ("Failed to set up a loop device")。ただし最大数のループデバイス (通常は256個) が作成され、マウントができるようになります。
With newer kernel versions there are no loop devices created at startup. If there are no loop devices the first time mounting a container file, TrueCrypt fails ("Failed to set up a loop device") but also creates the maximum number of loop devices (usually 256), mounting should now work.
 
   
  +
問題を回避するにはファイルをマウントする前にループデバイスを作成してください:
To avoid this you can create a loop device before mounting a file:
 
   
 
# mknod -m 0660 /dev/loop8 b 7 8
 
# mknod -m 0660 /dev/loop8 b 7 8
   
  +
上記のコマンドで {{ic|/dev/loop8}} が作成されます。起動時にループデバイスを作成するには:
This creates {{ic|/dev/loop8}}. Or create some loop devices at startup:
 
   
 
# echo "options loop max_loop=8" > /etc/modprobe.d/eightloop.conf
 
# echo "options loop max_loop=8" > /etc/modprobe.d/eightloop.conf
   
Change {{ic|1=max_loop=8}} to the number of devices you need.
+
{{ic|1=max_loop=8}} は必要なデバイスの数に置き換えてください。
   
 
=== システムパーティションのパスワードに en_US キーマップが必要 ===
 
=== システムパーティションのパスワードに en_US キーマップが必要 ===
  +
Xorg を使っている場合、以下のコマンドでキーマップを一時的に変更できます:
If you are using Xorg (which you most likely are, should you not know what that is), use the following command to use US keymap until restart:
 
   
 
# setxkbmap us
 
# setxkbmap us
429行目: 413行目:
 
== 参照 ==
 
== 参照 ==
   
* [http://www.truecrypt.org/ TrueCrypt homepage]
+
* [http://www.truecrypt.org/ TrueCrypt ホームページ]
* [http://www.howtoforge.com/truecrypt_data_encryption HowToForge の Truecrypt チュートリアル]
+
* [https://www.howtoforge.com/truecrypt_data_encryption HowToForge の Truecrypt チュートリアル]
 
* [http://www.privacylover.com/encryption/analysis-is-there-a-backdoor-in-truecrypt-is-truecrypt-a-cia-honeypot/ There is a good chance the CIA has a backdoor?] (via [https://secure.wikimedia.org/wikipedia/en/wiki/Truecrypt wp])
 
* [http://www.privacylover.com/encryption/analysis-is-there-a-backdoor-in-truecrypt-is-truecrypt-a-cia-honeypot/ There is a good chance the CIA has a backdoor?] (via [https://secure.wikimedia.org/wikipedia/en/wiki/Truecrypt wp])

2018年2月18日 (日) 20:06時点における最新版

関連記事

警告:
  • 2014年5月から、TrueCrypt の開発は中止され もはやアップデートや修正は行われない ことになっています。dm-crypttcplay など他の暗号化プログラムあるいは TrueCrypt のフォークを使用するようにしてください。例えば VeraCrypt は活発に開発されており veracrypt パッケージでインストールできます。VeraCrypt のストレージフォーマットはバージョン 1.0f から TrueCrypt のストレージフォーマットと互換性を持つようになっています。TrueCrypt のコードの監査については [1] を参照。
  • 2015年9月26日に TrueCrypt の Windows 版に深刻なセキュリティ問題が2つ発見されました: CVE-2015-7358 と CVE-2015-7359。Windows と Arch Linux で暗号化ボリュームを共有する場合は注意してください。詳しくは 12 を参照。

TrueCrypt はフリーでオープンソースのオンザフライ暗号化 (OTFE) プログラムです。TrueCrypt の機能として以下があります:

  • 実際のディスクとしてマウントできる仮想的な暗号化ディスク。
  • ハードディスクパーティションやストレージデバイス/メディアの全てを暗号化。
  • ストレージ暗号化の初期化ベクトルを推測することができる CBC モードよりも安全な LRW モードを全ての暗号化アルゴリズムで使用。
  • 通常の"外殻"の暗号化ボリュームの中に"隠しボリューム"を作成可能。パスフレーズやキーファイルが漏れない限り、隠しボリュームをランダムなデータの中から発見するのは不可能。

TrueCrypt と他のディスク暗号化ソリューションの詳しい比較はディスク暗号化#比較表を見て下さい。

インストール

ノート: 既存の TrueCrypt コンテナを開いてアクセスしたいときは cryptsetup を使用することを推奨します。新しい TrueCrypt コンテナは truecrypt で作成できます。

truecrypt パッケージをインストールしてください。linux 以外のカーネルを使っている場合は、適当なカーネルモジュールもインストールします。

truecrypt を使って仮想ファイルシステム (例: ファイル) を暗号化する場合は、truecrypt コマンドを実行したときに自動でモジュールがロードされます。

truecrypt を使って物理デバイス (例: ハードディスクや usb ドライブ) を暗号化する場合は、ブートシーケンスの間にモジュールをロードするようにしてください:

/etc/modules-load.d/ にモジュールを追加:

# tee /etc/modules-load.d/truecrypt.conf <<< "truecrypt"
ノート:
  • 上記の設定でうまくいかない場合、以下のように "loop" モジュールを追加することで動作します:
# tee /etc/modules-load.d/truecrypt.conf <<< "loop"
# modprobe loop
  • Arch の標準カーネルではモジュールのロードは必ずしも手動で行う必要はありません。ただし、カスタムカーネルを使用している場合は FUSEloop、および使用する暗号化アルゴリズム (例: AES, XTS, SHA512) を有効化する必要があります。既存の TrueCrypt コンテナにアクセスするだけなら TrueCrypt のインストールは不要です。

cryptsetup を使って TrueCrypt コンテナにアクセス

バージョン 1.6 から、cryptsetup は TrueCrypt と VeraCrypt のコンテナをネイティブで開けるようになっており、truecryptveracrypt パッケージを必要としません。cryptsetup でコンテナを開くには、次のコマンドを実行してください:

# cryptsetup --type tcrypt open container-to-mount container-name

container-to-mount を開きたい /dev 下のデバイスファイルやファイルのパスに置き換えてください。コンテナが開かれると /dev/mapper/container-name というデバイスが新しく認識され、通常のデバイスと同じように mount できるようになります。

VeraCrypt コンテナをマウントしたいときは、--type tcrypt に加えて --veracrypt オプションを使ってください。カスタム Personal Iteration Multiplier (PIM) を使用する場合、--veracrypt-query-pim オプションを使ってください。

キーファイルを使用する場合、--key-file オプションを使ってファイルを指定してください。隠しボリュームを開く場合は --tcrypt-hidden オプションを使ってください。システムモードで暗号kパされたパーティションあるいはデバイスを開くには --tcrypt-system オプションを使ってください。

サポートされているオプションなどの詳細は cryptsetup(8) を見て下さい。

/etc/crypttab を使って自動マウント

バージョン 206 から、systemd/etc/crypttab を使用して起動時に TrueCrypt コンテナを (自動的に) マウントすることをサポートしています。

以下のセットアップでは /mnt/truecrypt-volume にアクセスしたら systemd によって自動的にシステム暗号化モードで /dev/sda2 がマウントされます。ボリュームを開くためのパスフレーズは /etc/volume.password に記述します。自動マウントを使用するには /etc/fstab に指定するデバイスファイルは /dev/mapper/ のものでなくてはなりません。/dev/disk/by-uuid/ などは使えません。以下のように /dev/disk/ のデバイスファイル名を使うことで /etc/crypttab の中で暗号化ボリュームを問題なく識別できます:

/etc/crypttab
truecrypt-volume    /dev/sda2    /etc/volume.password    tcrypt-system,noauto

標準の truecrypt ボリュームの場合、tcrypt-system の代わりに tcrypt を使ってください。隠しボリュームの場合、tcrypt-hidden を使ってください。

/etc/fstab
/dev/mapper/truecrypt-volume    /mnt/truecrypt-volume    auto    noauto,x-systemd.automount    0    0

auto のかわりに直接、ファイルシステムやマウントオプションを指定することもできます。NTFS を通常ユーザーでマウントする場合などで有用です。

サポートされているオプションなどの詳細は crypttab(5) を参照してください。

ファイルを仮想ボリュームとして暗号化

以下では仮想ファイルシステムとして扱えるファイルを作成します。ファイルをマウントすれば暗号化ファイルの中にファイルを保存することが可能です。口座の情報やパスワードなど機密情報をシングルファイルに保存して Linux, Windows, macOS などからアクセスできるようにしたい場合に有用です。

新しい truecrypt ファイルをインタラクティブに作成するには、ターミナルに以下のコマンドを入力:

# truecrypt -t -c

指示に従ってファイルを作成できます。設定がよくわからない場合はデフォルトの値を使ってください:

Volume type:
 1) Normal
 2) Hidden
Select [1]: 1

Enter file or device path for new volume: /home/user/EncryptedFile.tc

Enter volume size (bytes - size/sizeK/sizeM/sizeG): 32M

Encryption algorithm:
 1) AES
 2) Blowfish
 3) CAST5
 4) Serpent
 5) Triple DES
 6) Twofish
 7) AES-Twofish
 8) AES-Twofish-Serpent
 9) Serpent-AES
10) Serpent-Twofish-AES
11) Twofish-Serpent
Select [1]: 1

Hash algorithm:
 1) RIPEMD-160
 2) SHA-1
 3) Whirlpool
Select [1]: 1  

Filesystem: 
 1) None
 2) FAT
 3) Linux Ext2
 4) Linux Ext3
 5) Linux Ext4
Select [2]: 2

Enter password for new volume '/home/user/EncryptedFile.tc': *****************************
Re-enter password: *****************************

Enter keyfile path [none]: 

Please type at least 320 randomly chosen characters and then press Enter:

Done: 32.00 MB  Speed: 10.76 MB/s  Left: 0:00:00  
Volume created.

新しい暗号化ファイルは既存のディレクトリにマウントできます:

# truecrypt -t /home/user/EncryptedFile.tc /home/user/EncryptedFileFolder
ノート: Truecrypt は root 権限を必要とします。通常ユーザーでファイルを使いたい場合は通常ユーザーでボリュームをマウントを参照してください。

マウントしたら、通常のディレクトリと同じように暗号化ディレクトリの中に新しいファイルをコピー・作成できます。再度暗号化するにはディレクトリをアンマウントします:

# truecrypt -t -d

上記のコマンドは管理者権限を必要とします。アンマウントしたら暗号化されたファイルがディレクトリから消えているかどうか確認してください (重要でないデータから試してみると良いでしょう)。

物理ボリュームの暗号化

ノート: グラフィカルインターフェイスで問題が起こる場合、-t フラグを使って CLI モードで起動してみてください。

キーファイルを使いたい場合は、次のコマンドでファイルを作成します:

# truecrypt --create-keyfile /etc/disk.key

デフォルトでは、ボリュームを解錠するにはパスフレーズとキーの両方が必要になります。

/dev/sda1 デバイスに新しいボリュームを作成:

# truecrypt --volume-type=normal -c /dev/sda1

ボリュームを /dev/mapper/truecrypt1 にマップ:

# truecrypt -N 1 /dev/sda1

上記のコマンドが使えない場合は次のコマンドでボリュームをマップしてみてください:

# truecrypt --filesystem=none --slot=1 /dev/sda1

お好きなファイルシステムを選択して、通常通りにディスクをフォーマットします。ただしパスには /dev/mapper/truecrypt1 を使います。例えば ext4 の場合:

# mkfs.ext4 /dev/mapper/truecrypt1

ボリュームをマウント:

# mount /dev/mapper/truecrypt1 /media/disk

ボリュームをマップしてマウント:

# truecrypt /dev/sda1 /media/disk

ボリュームをアンマウントしてマップを解除:

# truecrypt -d /dev/sda1

隠しボリュームの作成

先に、物理ボリュームの暗号化で説明されているように、通常の外殻ボリュームを作成してください。

外殻ボリュームを /dev/mapper/truecrypt1 にマップ:

# truecrypt -N 1 /dev/sda1

外殻ボリュームの空き領域に truecrypt の隠しボリュームを作成:

# truecrypt --type hidden -c /dev/sda1

外殻ボリュームとは異なるパスフレーズまたはキーファイルを使う必要があります。

外殻 truecrypt ボリュームをアンマップして隠しボリュームをマップ:

# truecrypt -d /dev/sda1
# truecrypt -N 1 /dev/sda1

隠しボリューム用のパスフレーズを使ってください。TrueCrypt は自動的にパスフレーズを選び取ります。

ファイルシステムを作成してマウント:

# mkfs.ext4 /dev/mapper/truecrypt1
# mount /dev/mapper/truecrypt1 /media/disk

書き込み保護を有効にして外殻ボリュームをマップ・マウント:

# truecrypt -P /dev/sda1 /media/disk

fstab でボリュームをマウント

まず最初に、fstab でマウントを処理するスクリプトを書く必要があります。以下を /usr/bin/mount.truecrypt として保存してください:

#!/bin/sh
DEV="$1"
MNTPT="$2"
OPTIONS=""
TCOPTIONS=""

shift 3
IFS=','
for arg in $*; do
    case "$arg" in
        system)                   TCOPTIONS=(${TCOPTIONS[*]} --m=system);;
        fs*)                      TCOPTIONS=(${TCOPTIONS[*]} --filesystem=${arg#*=});;
        keyfiles*)                TCOPTIONS=(${TCOPTIONS[*]} --keyfiles=${arg#*=});;
        password*)                TCOPTIONS=(${TCOPTIONS[*]} --password=${arg#*=}) && echo "password triggered" ;;
        protect-hidden*)          TCOPTIONS=(${TCOPTIONS[*]} --protect-hidden=${arg#*=});;
        *)                        OPTIONS="${OPTIONS}${arg},";;

    esac
done

/bin/truecrypt --text --non-interactive ${DEV} ${MNTPT} ${TCOPTIONS[*]} --fs-options="${OPTIONS%,*}"

ファイルに実行可能属性を付与してください:

# chmod +x /usr/bin/mount.truecrypt

最後に、fstab に以下のようにデバイスを追加してください:

/dev/sdb3 /mnt truecrypt fs=vfat,defaults 0 0
ヒント: 上記のスクリプトは truecrypt-mountAUR パッケージでもインストールできます。

通常ユーザーでボリュームをマウント

TrueCrypt を使うには root 権限が必要です。このセクションでは通常ユーザーにボリュームへの書き込み権限を与えて、通常ユーザーが TrueCrypt を使えるようにする方法を説明します。

以下のどちらの方法でも sudo が必要になります。先に進む前に sudo を設定するようにしてください。

方法 1: truecrypt グループを追加

truecrypt という名前の新しいグループを作成して必要な権限を与えます。グループに属しているユーザーは TrueCrypt を使えるようになります。

# groupadd truecrypt

sudo の設定を編集:

# visudo

sudo の設定ファイルの末尾に以下の行を追加:

# Users in the truecrypt group are allowed to run TrueCrypt as root.
%truecrypt ALL=(root) NOPASSWD:/usr/bin/truecrypt

使用するユーザーを truecrypt グループに追加:

# gpasswd -M first_user,second_user,etc truecrypt
ノート: 上記の変更を適用するには、ユーザーを一度ログアウトさせてから再ログインする必要があります。

その後、以下のコマンドでデバイスをマウントすることができます:

$ truecrypt --mount /path/to/device /path/to/mountpoint

デフォルトのマウントポイントは /media/truecrypt1 です。通常、--filesystem フラグを使ってデバイスのファイルシステムを明示的に指定する必要はありません。

truecrypt にはパーミッションマスクを指定すると良いでしょう。そうしないと、マウントしたデバイスの全てのファイルが実行可能になってしまいます。例:

$ truecrypt --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002 --mount /PATH/TO/DEVICE /PATH/TO/MOUNTPOINT

上記のコマンドは bash の設定ファイル (~/.bashrc) などにエイリアスとして追加できます:

alias tc1='truecrypt --fs-options=users,uid=$(id -u),gid=$(id -g),fmask=0113,dmask=0002 --mount /path/to/device"" /path/to/mountpoint'

指定したデバイスをマウントするには、通常ユーザーで以下のコマンドを使用します:

$ tc1

方法 2: sudo の簡易化

パスワードを入力せずに truecrypt を実行できるようにしたい場合、以下のコマンドを実行:

# visudo

そして以下を追加:

USERNAME ALL = (root) NOPASSWD:/usr/bin/truecrypt

もしくは wheel グループを使用する場合:

%wheel ALL = (root) NOPASSWD:/usr/bin/truecrypt

通常ユーザーのパーミッションが困る場合、truecrypt のマウントコマンドに -u フラグを追加してください。例:

$ truecrypt -u /home/user/EncryptedFile.tc /home/user/EncryptedFileFolder

ログイン時に自動マウント

スタートアップに以下を追加:

truecrypt /home/user/Encrypted File.tc /home/user/Encrypted File Folder <<EOF
password
EOF

-p スイッチは使わないでください。ps などのツールを使ってプロセスの名前からパスワードを確認できてしまいます [2]

The most recent truecrypt has a couple of followup questions. If you have expect installed, this will work (assuming no keyfile and no desire to protect hidden volume), saved to a file with root-only perms called from /etc/rc.local:

#! /bin/bash
expect << EOF
spawn /usr/bin/truecrypt ''/path/to/EncryptedFile'' ''/mount/point''
expect "Enter password"
send "volume password\n"
expect "Enter keyfile"
send "\n"
expect "Protect hidden volume"
send "\n"
expect eof;
EOF

上記はパスワードを普通に入力するのと比べるとセキュアでありませんが、TrueCrypt のファイルシステムが共有ストレージなどにあるときに、暗号化されないままの状態にするよりはましです。

(シャットダウン時に) ボリュームを安全にアンマウントしてマップを解除

以下のコマンドで指定したデバイスをアンマウントできます:

# truecrypt -d /path/to/mountpoint

全ての truecrypt ボリュームをアンマウントしたい場合はパスを省略してください。

シャットダウン時に自動的に truecrypt デバイスをアンマウントさせたい場合、以下を /etc/rc.local.shutdown ファイルに追加:

if (/usr/bin/truecrypt --text --list)
then {
/usr/bin/truecrypt -d
sleep 3
}
fi

sleep コマンドは取り払ってもかまいません。実際にシャットダウンする前にアンマウントする猶予を与えているだけです。

エラー

TrueCrypt is already running

TrueCrypt の起動時に TrueCrypt is already running というメッセージボックスが表示される場合、ホームディレクトリに .TrueCrypt-lock-username という名前の隠しファイルが存在しないか確認してください (username はあなたのユーザー名に置き換えて下さい)。ファイルを削除して TrueCrypt を再起動してください。

Deleted stale lockfile

Truecrypt の起動後に "Delete stale lockfile [....]" というメッセージが表示される場合、GNOME のログアウト時に ID が一番小さい Truecrypt のプロセスを終了する必要があります。/etc/gdm/PostSession/Default を編集して exit 0 の前に以下の行を追加してください:

kill $(ps -ef | grep truecrypt | tr -s ' ' | cut -d ' ' -f 2)

ユニコードのファイル/フォルダ名の問題

NTFS

(暗号化されていない NTFS パーティションは問題なく扱えるのに) 名前にユニコード文字が含まれているファイルやフォルダが TrueCrypt の NTFS ボリュームで表示されない場合、最初に NTFS-3G ドライバーがインストールされているかどうか確認してください。そして以下のシンボリックリンクを root で作成してください:

# ln -s /sbin/mount.ntfs-3g /sbin/mount.ntfs

自動的に NTFS ボリュームで NTFS-3G ドライバーが使われるようになります。コンソールで以下のように指定するのと同じです:

# truecrypt --filesystem=ntfs-3g /path/to/volume

TrueCrypt の GUI (Settings > Preferences > Mount Options) で以下のオプションを設定できます:

rw,noatime

FAT

同じように、Windows で作成した FAT32 ボリュームは ISO 8859-1 ではなく Unicode が使われることがあります。UTF-8 を使用するには、マウントオプションを設定:

iocharset=utf8

もしくは、ボリュームをローカルにマウントする際に以下のように指定:

--fs-options=iocharset=utf8

linux-4.14.4 から [3]、デフォルトで UTF8 文字セットが有効になっているため、ISO 8859-1 エンコーディングを使ってボリュームをマウントするには以下のオプションが必要です:

--fs-options=utf8=no

アンマウントエラー (device mapper)

truecrypt のボリュームをアンマウントしようとすると "device-mapper: remove ioctl failed: Device or resource busy" とメッセージが表示される場合、解決方法は Setting > Preferences > System Integration > Kernel Service から次のボックスにチェックを入れて下さい:

Do not use kernel cryptographic services

マウントエラー (device mapper, truecrypt partition)

truecrypt ボリュームをマウントしようとすると、以下のようなメッセージが表示される場合:

Error: device-mapper: create ioctl failed: Device or resource busy
Command failed

次を実行してください:

# cryptsetup remove /dev/mapper/truecrypt1

Failed to set up a loop device

TrueCrypt ボリュームを作成・マウントしようとすると "Failed to set up a loop device" というメッセージが表示される場合、最近カーネルをアップデートしたのに再起動していないのが原因です。再起動を行えばエラーはなくなるでしょう。

それでもエラーが消えない場合、loop がカーネルモジュールとしてロードされているか確認してください:

$ lsmod | grep loop

loop がロードされていない場合、modprobe loop を実行した後に TrueCrypt のコマンドを実行してみてください。それで上手くいくときは、/etc/modules-load.d のモジュールに loop を追加すると良いでしょう:

# tee /etc/modules-load.d/truecrypt.conf <<< "loop"
ノート: udev 181-5 現在、ループデバイスモジュールは自動ロードされません。上記の設定が必要です。

新しいバージョンのカーネルでは起動時にループデバイスが作成されません。ループデバイスが存在しないと、コンテナファイルのマウントに TrueCrypt が失敗します ("Failed to set up a loop device")。ただし最大数のループデバイス (通常は256個) が作成され、マウントができるようになります。

問題を回避するにはファイルをマウントする前にループデバイスを作成してください:

# mknod -m 0660 /dev/loop8 b 7 8

上記のコマンドで /dev/loop8 が作成されます。起動時にループデバイスを作成するには:

# echo "options loop max_loop=8" > /etc/modprobe.d/eightloop.conf

max_loop=8 は必要なデバイスの数に置き換えてください。

システムパーティションのパスワードに en_US キーマップが必要

Xorg を使っている場合、以下のコマンドでキーマップを一時的に変更できます:

# setxkbmap us

NTFS ボリュームで Permission denied

パーミッションに問題がないのに、ファイルシステムに変更を加えられない場合、NTFS-3G がインストールされていないのが原因のことがあります。NTFS を見て下さい。

参照