「ブートデバッグ」の版間の差分

提供: ArchWiki
ナビゲーションに移動 検索に移動
 
(同じ利用者による、間の3版が非表示)
1行目: 1行目:
  +
#redirect[[一般的なトラブルシューティング#起動時の問題]]
[[Category:ブートプロセス]]
 
[[Category:システムリカバリ]]
 
[[en:Boot debugging]]
 
[[it:Boot Debugging]]
 
{{Related articles start}}
 
{{Related|Arch ブートプロセス}}
 
{{Related|ブートローダー}}
 
{{Related|Netconsole}}
 
{{Related|カーネルモジュール}}
 
{{Related|mkinitcpio}}
 
{{Related|Kernel Mode Setting}}
 
{{Related|systemd}}
 
{{Related articles end}}
 
 
様々なデバッグ出力のレベルで既存のシステムを簡単に出来るように、カーネルはあらゆる高度な設定を行うための便利な手段を用意しています [https://www.kernel.org/doc/Documentation/kernel-parameters.txt]。ブートローダーの設定にエントリを追加するだけで、とても簡単に複数のレベルのデバッグを作成することが可能です。電源やハードウェアの問題によって、後で問題が起こった時に、手数を減らすことができ、また、システムについて習熟したいと思った時にデバッグ出力に勝るものはありません。
 
 
まず、[[カーネルパラメータ]]の記事を読んでブートローダーにカーネルパラメータを追加する方法を見て下さい。
 
 
== デバッグレベル ==
 
=== Light Debug ===
 
コンソールで詳細なメッセージを見るための一番簡単な方法はブートローダーのエントリの kernel 行に {{ic|verbose}} を追加してから起動することです。
 
 
=== Medium Debug ===
 
kernel 行に {{ic|debug}} カーネルパラメータを追加することでデフォルト状態に比べて多くのデバッグ情報を得ることができます。
 
 
=== Heavy Debug ===
 
さらに効果的なカーネルパラメータとして {{ic|ignore_loglevel}} があり、ログレベルを全て無視して、システムの内部的なログレベルが最大レベルにまで引き上げられます。
 
 
=== Extreme Debug ===
 
"Heavy Debug" でも大量の出力がなされますが、[[カーネルパラメータ]]を加えることでさらに倍以上のログを出力できます:
 
debug ignore_loglevel log_buf_len=10M print_fatal_signals=1 LOGLEVEL=8 earlyprintk=vga,keep sched_debug
 
 
EFI 環境の場合:
 
 
debug ignore_loglevel log_buf_len=10M print_fatal_signals=1 LOGLEVEL=8 earlyprintk=efi,keep sched_debug
 
 
カーネルパラメータの説明:
 
* {{ic|earlyprintk}} パラメータはメッセージを ''vga'' スクリーンや ''EFI'' フレームバッファに ''early'' ''printing'' するようにカーネルを設定します。
 
* The {{ic|keep}} parameter just lets it stay on the screen longer. This will let you see logs that normally are hidden due to the boot-up process.
 
* {{ic|1=log_buf_len=10M}} はログバッファの長さを 10MB に変更します。
 
* {{ic|print_fatal_signals}} によって fatal signal を全て表示します。
 
* With the last one, {{ic|sched_debug}}, you can look up in the very excellent kernel documentation on [https://www.kernel.org/doc/Documentation/kernel-parameters.txt kernel parameters].
 
 
=== Insane Debug ===
 
The first few debugging kernel parameters turn on really verbose debugging. This kind of debugging is absolutely critical if you want to max out your system or just learn more about what is going on behind the scenes. But there is a final trick that is my favorite, which is the ability to set both environment variables and, more importantly, module parameters at boot.
 
 
As an example, here is some truly insane debugging [[kernel parameters]]. Note that the actual GRUB entry is all on one line. This turns on many devices to be at the absolute max debug level. The machine may be slower than a TI-89 calculator (See [[Improve boot performance]]).
 
 
rootwait ignore_loglevel debug debug_locks_verbose=1 sched_debug initcall_debug
 
mminit_loglevel=4 udev.log_priority=8 loglevel=8 earlyprintk=vga,keep log_buf_len=10M
 
print_fatal_signals=1 apm.debug=Y i8042.debug=Y drm.debug=1 scsi_logging_level=1
 
usbserial.debug=Y option.debug=Y pl2303.debug=Y firewire_ohci.debug=1 hid.debug=1
 
pci_hotplug.debug=Y pci_hotplug.debug_acpi=Y shpchp.shpchp_debug=Y apic=debug
 
show_lapic=all hpet=verbose lmb=debug pause_on_oops=5 panic=10 sysrq_always_enabled
 
 
A couple key items are {{ic|sysrq_always_enabled}} which forces on the SysRq magic, which really is a lifesaver when debugging at this level, as your machine will freeze/stop-responding sometimes, and it is nice to use SysRq to kill all tasks, change the log level, unmount all file systems, or do a hard reboot. Another key parameter is {{ic|initcall_debug}}, which debugs the init process in excruciating detail, which can be very useful at times. The last parameter I find very useful is {{ic|1=udev.log-priority=8}} to turn on [[udev]] logging.
 
 
== デバッグの方法 ==
 
=== モジュールパラメータ ===
 
[[カーネルモジュール]]を見て下さい。
 
 
=== Init に割り込む ===
 
For instance, if you add {{ic|1=break=y}} to your kernel command line, init will pause early in the [[Arch ブートプロセス|boot process]] (after loading modules) and launch an interactive sh shell which can be used for troubleshooting purposes. Normal boot continues after logging out. This is very similar to the shell that shows up if your computer gets turned off before it is able to shutdown properly. But using this parameter lets you enter into this mode differently at will.
 
 
=== init のデバッグ ===
 
The awesome parameter {{ic|1=udev.log-priority=8}} does the same thing as editing the file {{ic|/etc/udev/udev.conf}} except it executes earlier, turning on debugging output for [[udev]]. If you want to know your hardware, that is the key parameter right there. Another trick is if you change the {{ic|/etc/udev/udev.conf}} to be verbose, then you can make your initramfs image include that file to turn on verbose udev debugging by adding it to your {{ic|/etc/mkinitcpio.conf}} like:
 
FILES="/etc/modprobe.d/modprobe.conf /etc/udev/udev.conf"
 
 
which, on Arch, is as easy as
 
# mkinitcpio -p linux
 
 
Debugging [[udev]] is important because the initramfs performs a [[Change Root|root change]] at the end of its run to usually launch a program like {{ic|/sbin/init}} as part of a chroot, and unless the new file system has a valid {{ic|/dev}} directory, udev must be initialized before invoking chroot in order to provide {{ic|/dev/console}}.
 
 
exec chroot . /sbin/init <dev/console >dev/console 2>&1
 
 
So basically, you are not able to view the logs that are generated before {{ic|/dev/console}} is initialized by udev or by a special initramfs you compiled yourself. One method the kernel developers use to be able to still get the log messages generated before {{ic|/dev/console}} is available, is to provide an alternative console that you can enable or disable from GRUB.
 
 
=== netconsole ===
 
If you read through the [https://www.kernel.org/doc/Documentation/networking/netconsole.txt kernel documentation regarding debugging], you will read about [[netconsole]], which can be compiled into your kernel or loaded at runtime as a module. Having a netconsole entry in your [[kernel parameters]] is most excellent for debugging slower computers like old laptops or thin-clients. It is easy to use:
 
# Set up a 2nd computer (running Arch) to accept syslog requests on a remote port, which is one line in {{ic|syslog.conf}}.
 
# Then you could use a log-color-parser like ccze to view all syslog logs, or just tail your {{ic|/var/log/everything.log}} file.
 
# On your laptop, boot up and add {{ic|1=netconsole=514@10.0.0.2/12:34:56:78:9a:bc debug ignore_loglevel}} into [[kernel parameters]].
 
# You will start seeing as much logging as you want on your syslog system. This logging lets you view even earlier log output than is available with the {{ic|1=earlyprintk=vga}} kernel parameter, as netconsole is used by kernel hackers and developers, so it is very powerful.
 
 
=== cmdline をハイジャック ===
 
If you do not have access to GRUB or the kernel boot-time command line, like on a server or virtual machine, as long as you have root permissions, you can still enable this kind of simplistic verbose logging using a neat hack. While you cannot modify the {{ic|/proc/cmdline}} even as root, you can place your own cmdline file on top of {{ic|/proc/cmdline}}, so that accessing {{ic|/proc/cmdline}} actually accesses your file instead.
 
 
For example, if I {{ic|cat /proc/cmdline}}, I have the following:
 
 
root=/dev/disk/by-label/ROOT ro console=tty1 logo.nologo quiet
 
 
So I use a simple ''sed'' command to replace {{ic|quiet}} with {{ic|verbose}} like:
 
 
sed '/root=/s/ quiet/ verbose/g' /proc/cmdline > /root/cmdline
 
 
Then I bind mount {{ic|/root/cmdline}} so that it becomes {{ic|/proc/cmdline}}, using the {{ic|-n}} option to mount, so that this mount will not be recorded in the system's mtab.
 
 
mount -n --bind -o ro /root/cmdline /proc/cmdline
 
 
Now if I {{ic|cat /proc/cmdline}}, I have the following:
 
 
root=/dev/disk/by-label/ROOT ro console=tty1 logo.nologo verbose
 
 
== トラブルシューティング ==
 
=== 出力が途切れる ===
 
==== 解像度の変更時に出力が消える ====
 
解像度が変更されるときに起動出力が消えてしまう場合、デバッグのために [[KMS#モードセッティングを無効にする|KMS を無効化]]することができます。
 
 
==== スクロールができない ====
 
起動時の出力が4または5ページに限られており、上記のデバッグパラメータを使うためにもっと表示させたい場合、[[カーネルパラメータ]]に以下のアイテムを追加します:
 
fbcon=scrollback:512k
 
 
詳しくは[[スクロールバックバッファ]]を参照。
 
 
=== Arch ライブ CD で修復 ===
 
GRUB がカーネルを起動できなくなったり、initramfs が壊れた場合、[https://www.archlinuxjp.org/download/ Arch ライブ CD] を使って安全にシステムを起動することができます。修復が修正したら、壊れたシステムをアンマウントして、再起動してください。
 
 
==== 壊れたシステムのマウントと chroot ====
 
Once booted and at a console prompt, use the following to mount and repair your broken system (where {{ic|/dev/sda3}} is {{ic|/}} and {{ic|/dev/sda1}} is {{ic|/boot}}):
 
 
First, create the mount point, and mount your root {{ic|/}} file system to it; then, {{ic|cd}} into it.
 
# mkdir /mnt/arch
 
# mount /dev/sda3 /mnt/arch
 
# cd /mnt/arch
 
Now, create the proc, sysfs, and dev file systems
 
# mount -t proc proc proc/
 
# mount -t sysfs sys sys/
 
# mount -o bind /dev dev/
 
Next, mount the boot partition if you use one.
 
# mount /dev/sda1 boot/
 
Finally, chroot into {{ic|/mnt/arch}} which will become {{ic|/}}.
 
# chroot .
 
Turn on networking.
 
 
==== pacman で再インストール ====
 
The author uses pacman in a chrooted broken system to reinstall the kernel, GRUB, initramfs, udev, and any other packages that may be broken and/or needed to get the system up and running.
 
 
This will reinstall the kernel and initramfs so check that {{ic|/etc/mkinitcpio.conf}} is correct or remove the file entirely and re-install mkinitcpio.
 
# pacman -Syyu mkinitcpio linux udev
 
 
Afterwards, unmount and reboot.
 
 
==参照==
 
* [http://www.memtest.org/ Memtest86+]
 
* [http://wiki.ultimatebootcd.com/index.php?title=Tools List of Tools for UBCD] - Can be added to custom menu.lst like memtest
 
* GRUB2 公式マニュアル - https://www.gnu.org/software/grub/manual/grub.html
 
* Ubuntu wiki page for GRUB2 - https://help.ubuntu.com/community/Grub2
 
* GRUB2 wiki page describing steps to compile for UEFI systems - https://help.ubuntu.com/community/UEFIBooting
 
* Wikipedia's page on [[Wikipedia:BIOS Boot partition|BIOS Boot partition]]
 
* [https://fedoraproject.org/wiki/QA/Sysrq QA/Sysrq] - Using sysrq
 
* systemd ドキュメント: [http://freedesktop.org/wiki/Software/systemd/Debugging#Debug_Logging_to_a_Serial_Console Debug Logging to a Serial Console]
 
* [https://lesswatts.org/projects/acpi/debug.php How to Isolate Linux ACPI Issues]
 

2016年12月6日 (火) 01:10時点における最新版