コンテンツにスキップ

「Savage」の版間の差分

提供: ArchWiki
削除された内容 追加された内容
ページの作成:「Category:グラフィック Category:X サーバー en:Savage {{Related articles start}} {{Related|Xorg}} {{Related articles end}} Savage は S3 と VIA に...」
 
アーカイブ
タグ: 新規リダイレクト
 
(他の1人の利用者による、間の1版が非表示)
1行目: 1行目:
[[Category:グラフィック]]
[[Category:X サーバー]]
[[en:Savage]]
{{Related articles start}}
{{Related|Xorg}}
{{Related articles end}}
Savage は S3 と VIA によって製造されていたビデオチップセットです。Linux ドライバーは Savage, ProSavage, Twister チップセットをサポートしています。


#redirect [[ArchWiki:アーカイブ]]
==Xorg ドライバー==
[[Category:アーカイブ]]

===インストール===

既に [[Xorg]] をインストールしている場合、[[公式リポジトリ]]から {{pkg|xf86-video-savage}} をインストールしてください。

===設定===

{{ic|/etc/X11/xorg.conf.d/}} に {{ic|99-savage.conf}} という名前の設定ファイルを作成 (名前は自由に付けて構いません):

# nano /etc/X11/xorg.conf.d/99-savage.conf

以下のテキストを貼り付けてファイルを保存してください:

Section "Device"
Identifier "gfxcard"
Driver "savage"
# You will likely have to use NoAccel. You can try EXA, but it's likely you will end up
# with a corrupted screen or a hard lockup.
Option "NoAccel" "True"
# Use ShadowFB instead of acceleration. It's unlikely that acceleration will provide
# any benefits on this ancient chipset anyway.
Option "ShadowFB" "Enable"
# The following two options might or might not improve performance. Remove the "#" to
# try using them:
# Option "NoPciBurst" "Enable"
# Option "FramebufferWC"
# If Xorg crashes on startup (hangs with black screen) you may try out the following
# two lines (by removing the "#" before the line):
# Option "NoDDC"
# The 1024 in UseTiming is for a Notebook with a native resolution of 1024x768 pixel.
# If you have a native resolution of 800x600 pixel you should use "UseTiming800" instead.
# Option "UseTiming1024"
# EXA might or might not work. It's likely that it will not, but if you want to try it,
# uncomment the following line and comment out the "NoAccel" option:
# Option "AccelMethod" "EXA"
EndSection
Section "Screen"
Identifier "Screen 0"
Device "gfxcard"
Monitor "Monitor 0"
# You can try setting DefaultDepth to 24, but many Savage cards only have 8MB of RAM
# and may not be able to achieve higher resolutions with 24-bit color.
DefaultDepth 16
EndSection
Section "Monitor"
Identifier "Monitor 0"
Option "DPMS" "Disable"
EndSection

10以上前のチップセットなのでサポートはあまり手厚くないためアクセラレーションは切ったほうが良いでしょう。上記の設定は Savage/IX でテスト済みです。

== フレームバッファ ==

残念ながら、Savage チップセットのフレームバッファドライバーは存在しません。{{ic|vga}} [[カーネルパラメータ]]でフレームバッファのビデオモードを設定してみてください。例えば、800x600 のフレームバッファなら {{ic|1=vga = 0x314}} と、1024x768 のフレームバッファなら {{ic|1=vga = 0x317}} と設定します。

2023年9月2日 (土) 21:23時点における最新版