共通アクセスカード

関連記事

• スマートカード

このページでは、米国国防総省の 共通アクセスカード (CAC) を使用するための Arch の設定方法について説明します。

インストール

公式リポジトリ から ccid と opensc をインストールします。

設定

ノート: You should not have to edit your opensc configuration files by default. You should check all other setup items first (e.g. certificate imports)

If your card reader does not have a pin pad, uncomment enable_pinpad = false in /etc/opensc.conf.

Sometimes opensc can struggle to identify the proper driver for CAC, instead it may choose PIV or something else. You can force the CAC driver by editing /etc/opensc.conf for card_drivers = cac and force_card_driver = cac

pcscd を有効にする

pcscd.socket を 開始 して有効にします。

Configure browser

1. Go to: https://public.cyber.mil/pki-pke/pkipke-document-library/
2. Download certs: "PKI CA Certificate Bundles: PKCS#7 For DoD PKI Only - Version 5.9" (ZIP Download)
3. Unzip the DoD PKI zip
4. Follow browser-specific instructions

Firefox

セキュリティデバイスをロードする

Navigate to Edit -> Preference -> Advanced -> Certificates -> Security Devices and click "Load" to load a module using /usr/lib/opensc-pkcs11.so or /usr/lib/pkcs11/opensc-pkcs11.so.

ノート: Firefox may report the module did not load correctly however you will have to check in the security devices to confirm whether the module properly loaded or not

Import the DoD Certificates

Install the certificates from the mentioned zip-file in this order, by going to Edit -> Preference -> Advanced -> Certificates -> View Certificates -> Authorities -> Import (make sure to at-least check the box for "Trust this CA to identify websites"):

ノート: As of the 5.9 version of the certificate zip

1. Certificates_PKCS7_v5.9_DoD.der.p7b
2. Certificates_PKCS7_v5.9_DoD_DoD_Root_CA_2.der.p7b
3. Certificates_PKCS7_v5.9_DoD_DoD_Root_CA_3.der.p7b
4. Certificates_PKCS7_v5.9_DoD_DoD_Root_CA_4.der.p7b
5. Certificates_PKCS7_v5.9_DoD_DoD_Root_CA_5.der.p7b
6. Certificates_PKCS7_v5.9_DoD.pem.p7b

Chromium/Google Chrome

1. Add the CAC Module to the NSS DB.

Ensure that your CAC is connected, that Chromium is closed and enter the following in a terminal: $ modutil -dbdir sql:$HOME/.pki/nssdb/ -add "CAC Module" -libfile /usr/lib/opensc-pkcs11.so

ノート: You may see the message 'Failure to load dynamic library'. This can be ignored.

Upon success you will see "Module "CAC Module" added to database."

2. Check if the CAC Module was successfully added with $ modutil -dbdir sql:$HOME/.pki/nssdb/ -list

3. Navigate (in a shell) to the location of the unzip DoD PKI files and install via:

 for n in $(ls * | grep Chrome); do certutil -d sql:$HOME/.pki/nssdb -A -t TC -n $n -i $n; done

or

Re-open Chrome, Navigate to Settings -> Show Advanced Settings -> Manage Certificates -> Authorities to load CA bundle from the PEM-formatted file from above.

4. Verify the authority is in Chrome under Settings -> Show Advanced Settings -> Manage Certificates -> Authorities then expand "org-U.S. Government" and you should see a number of "DoD" certificates listed.

VMware Horizon Client

Install vmware-horizon-client^AUR, vmware-horizon-usb^AUR, and vmware-horizon-smartcard^AUR. Start and enable vmware-horizon-usb.service.

To integrate CAC authentication with the VMware Horizon Client, create the directory /usr/lib/vmware/view/pkcs11 and link the pkcs11 library:

# ln -s /usr/lib64/pkcs11/opensc-pkcs11.so /usr/lib/vmware/view/pkcs11/libopenscpkcs11.so

Testing

Visit your favorite CAC secured web page and you should be asked for the Master Password for your certificate. Enter it and if you get in, you know it is working.

If some sites/pages seem to have a problem working correctly (e.g. outlook web access will not authenticate the session for DoD webmail) try using a private/incognito session to test validity of the cert chain and remove some variables.

Debugging

opensc-tool

Most of this information was found in a blog post by Firas Kraïem

Verify opensc can see your reader

$ opensc-tool --list-readers 

# Detected readers (pcsc)
Nr.  Card  Features  Name
0    Yes            Generic USB2.0-CRW [Smart Card Reader Interface] (20070818000000000) 00 00

List plugged in card

$ opensc-tool --reader 0 --name 

Personal Identity Verification Card

List plugged in card and drive in use

$ opensc-tool --reader 0 --name -v

Connecting to card in reader Generic USB2.0-CRW [Smart Card Reader Interface] (20070818000000000) 00 00...
Using card driver Personal Identity Verification Card.
Card name: Personal Identity Verification Card

pcsc-tools

The pcsc-tools package is also availabe in [community]. The program pcsc_scan may be helpful

[cceleri@ender ~]$ pcsc_scan 
PC/SC device scanner
V 1.4.21 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.8.6
Using reader plug'n play mechanism
Scanning present readers...
0: Dell Dell Smart Card Reader Keyboard 00 00

Thu Sep  5 10:41:53 2013
Reader 0: Dell Dell Smart Card Reader Keyboard 00 00
  Card state: Card removed, 

Thu Sep  5 10:41:58 2013
Reader 0: Dell Dell Smart Card Reader Keyboard 00 00
  Card state: Card inserted, 
  ATR: 3B DB 96 00 80 1F 03 00 31 C0 64 B0 F3 10 00 07 90 00 80

ATR: 3B DB 96 00 80 1F 03 00 31 C0 64 B0 F3 10 00 07 90 00 80
+ TS = 3B --> Direct Convention
+ T0 = DB, Y(1): 1101, K: 11 (historical bytes)
  TA(1) = 96 --> Fi=512, Di=32, 16 cycles/ETU
    250000 bits/s at 4 MHz, fMax for Fi = 5 MHz => 312500 bits/s
  TC(1) = 00 --> Extra guard time: 0
  TD(1) = 80 --> Y(i+1) = 1000, Protocol T = 0 
-----
  TD(2) = 1F --> Y(i+1) = 0001, Protocol T = 15 - Global interface bytes following 
-----
  TA(3) = 03 --> Clock stop: not supported - Class accepted by the card: (3G) A 5V B 3V 
+ Historical bytes: 00 31 C0 64 B0 F3 10 00 07 90 00
  Category indicator byte: 00 (compact TLV data object)
    Tag: 3, len: 1 (card service data byte)
      Card service data byte: C0
        - Application selection: by full DF name
        - Application selection: by partial DF name
        - EF.DIR and EF.ATR access services: by GET RECORD(s) command
        - Card with MF
    Tag: 6, len: 4 (pre-issuing data)
     Data: B0 F3 10 00
    Mandatory status indicator (3 last bytes)
      LCS (life card cycle): 07 (Operational state (activated))
      SW: 9000 (Normal processing.)
+ TCK = 80 (correct checksum)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
3B DB 96 00 80 1F 03 00 31 C0 64 B0 F3 10 00 07 90 00 80
	DoD CAC, Oberthur ID One 128 v5.5 Dual

参照

• PIV Usage Guides