Linux コンソール

提供: ArchWiki
2020年12月21日 (月) 18:35時点におけるKusanaginoturugi (トーク | 投稿記録)による版 (序文の和訳)
ナビゲーションに移動 検索に移動

関連記事

Wikipedia より:

Linux コンソールは、Linux カーネル に内蔵されているシステムコンソールです。Linux コンソールは、カーネルや他のプロセスがテキスト出力をユーザに送信したり、ユーザからのテキスト入力を受信したりするための方法を提供します。ユーザは通常、コンピュータのキーボードでテキストを入力し、出力されたテキストをコンピュータのモニタで読みます。Linux カーネルは仮想コンソールをサポートしています - コンソールは論理的に分離されていますが、同じ物理キーボードとディスプレイにアクセスします。

この記事では、Linux コンソールの基本とフォント表示の設定方法について説明します。キーボードの設定は、/キーボード設定 サブページで説明しています。

Implementation

この記事またはセクションは加筆を必要としています。
理由: In what ways is the Linux console limited compared to terminal emulators? (議論: トーク:Linux コンソール#)

The console, unlike most services that interact directly with users, is implemented in the kernel. This contrasts with terminal emulation software, such as Xterm, which is implemented in user space as a normal application. The console has always been part of released Linux kernels, but has undergone changes in its history, most notably the transition to using the framebuffer and support for Unicode.

Despite many improvements in the console, its full backward compatibility with legacy hardware means it is limited compared to a graphical terminal emulator.

Virtual consoles

The console is presented to the user as a series of virtual consoles. These give the impression that several independent terminals are running concurrently; each virtual console can be logged in with different users, run its own shell and have its own font settings. The virtual consoles each use a device /dev/ttyX, and you can switch between them by pressing Alt+Fx (where x is equal to the virtual console number, beginning with 1). The device /dev/console is automatically mapped to the active virtual console.

See also chvt(1), openvt(1) and deallocvt(1).

Text mode

この記事またはセクションは加筆を必要としています。
理由: How do you boot in text mode? (議論: トーク:Linux コンソール#)

Since Linux originally began as a kernel for PC hardware, the console was developed using standard IBM CGA/EGA/VGA graphics, which all PCs supported at the time. The graphics operated in VGA text mode, which provides a simple 80x25 character display with 16 colours. This legacy mode is similar to the capabilities of dedicated text terminals, such as the DEC VT100 series. It is still possible to boot in text mode if the system hardware supports it, but almost all modern distributions (including Arch Linux) use the framebuffer console instead.

Framebuffer console

As Linux was ported to other non-PC architectures, a better solution was required, since other architectures do not use VGA-compatible graphics adapters, and may not support text modes at all. The framebuffer console was implemented to provide a standard console across all platforms, and so presents the same VGA-style interface regardless of the underlying graphics hardware. As such, the Linux console is not a terminal emulator, but a terminal in its own right. It uses the terminal type linux, and is largely compatible with VT100.

Keyboard shortcuts

Keyboard Shortcut Description
Ctrl+Alt+Del Reboots the system (specified by the symlink /usr/lib/systemd/system/ctrl-alt-del.target)
Alt+F1, F2, F3, ... Switch to n-th virtual console
Alt+ ← Switch to previous virtual console
Alt+ → Switch to next virtual console
Scroll Lock When Scroll Lock is activated, input/output is locked
Ctrl+c Kills current task
Ctrl+d Inserts an EOF
Ctrl+z Pauses current Task

See also console_codes(4).

Fonts

この記事またはセクションは加筆を必要としています。
理由: Mention kernel's builtin VGA 8x16 font (CONFIG_FONT_8x16) and Terminus 16x32 font (CONFIG_FONT_TER16x32), and how to use them. Link to HiDPI#Linux console. (議論: トーク:Linux コンソール#)
ノート: This section is about the Linux console. For alternative console solutions offering more features (full Unicode fonts, modern graphics adapters etc.), see KMSCON or similar projects.

By default, the virtual console uses the kernel built-in font with a CP437 character set,[1] but this can be easily changed.

The Linux console uses UTF-8 encoding by default, but because the standard VGA-compatible framebuffer is used, a console font is limited to either a standard 256, or 512 glyphs. If the font has more than 256 glyphs, the number of colours is reduced from 16 to 8. In order to assign correct symbol to be displayed to the given Unicode value, a special translation map, often called unimap, is needed. Nowadays most of the console fonts have the unimap built-in; historically, it had to be loaded separately.

The kbd package provides tools to change virtual console font and font mapping. Available fonts are saved in the /usr/share/kbd/consolefonts/ directory, those ending with .psfu or .psfu.gz have a Unicode translation map built-in.

Keymaps, the connection between the key pressed and the character used by the computer, are found in the subdirectories of /usr/share/kbd/keymaps/, see /Keyboard configuration for details.

ノート: Replacing the font can cause issues with programs that expect a standard VGA-style font, such as those using line drawing graphics.
ヒント: For European based languages written in Latin/Greek letters you can use eurlatgr font, it includes a broad range of Latin/Greek letter variations as well as special characters [2].

Preview and temporary changes

ヒント: An organized library of images for previewing is available: Linux console fonts screenshots.
$ showconsolefont

shows a table of glyphs or letters of a font.

setfont temporarily change the font if passed a font name (in /usr/share/kbd/consolefonts/) such as

$ setfont lat2-16 -m 8859-2

Font names are case-sensitive. With no parameter, setfont returns the console to the default font.

So to have a small 8x8 font, with that font installed like seen below, use e.g.:

$ setfont -h8 /usr/share/kbd/consolefonts/drdos8x8.psfu.gz

To have a bigger font, the Terminus font (terminus-font) is available in many sizes, such as ter-132n which is large.

ヒント: All font changing commands can be typed in "blind".
ノート: setfont only works on the console currently being used. Any other consoles, active or inactive, remain unaffected.

Persistent configuration

The FONT variable in /etc/vconsole.conf is used to set the font at boot, persistently for all consoles. See vconsole.conf(5) for details.

For displaying characters such as Č, ž, đ, š or Ł, ę, ą, ś using the font lat2-16.psfu.gz:

/etc/vconsole.conf
...
FONT=lat2-16
FONT_MAP=8859-2

It means that second part of ISO/IEC 8859 characters are used with size 16. You can change font size using other values (e.g. lat2-08). For the regions determined by 8859 specification, look at the Wikipedia:ISO/IEC 8859#The parts of ISO/IEC 8859.

To use the specified font in early userspace, use the consolefont hook in /etc/mkinitcpio.conf. See Mkinitcpio#HOOKS for more information.

If the fonts appear to not change on boot, or change only temporarily, it is most likely that they got reset when graphics driver was initialized and console was switched to framebuffer. To avoid this, load your graphics driver earlier. See for example Kernel mode setting#Early KMS start, [3] or other ways to setup your framebuffer before /etc/vconsole.conf is applied.

HiDPI

HiDPI#Linux コンソール を参照。

Audible tones

PC スピーカー#Beep を参照。

See also