ファイルのパーミッションと属性

関連記事

• ユーザーとグループ
• umask
• アクセス制御リスト
• ケイパビリティ

パーミッションの表示

In order to use chmod to change permissions of a file or directory, you will first need to know what the current mode of access is. You can view the contents of a directory in the terminal by "cd" to that directory and then using:

$ ls -l 

The -l switch is important because using ls without it will only display the names of files or folders in the directory.

Below is an example of using ls -l on my home directory:

$ ls -l

total 128
-rw-r--r-- 1 ben users   832 Jul  6 17:22 #chmodwiki#
drwxr-xr-x 2 ben users  4096 Jul  5 21:03 Desktop
drwxr-xr-x 6 ben users  4096 Jul  5 17:37 Documents
drwxr-xr-x 2 ben users  4096 Jul  5 13:45 Downloads
drwxr-xr-x 2 ben users  4096 Jun 24 03:36 Movies
drwxr-xr-x 2 ben users  4096 Jun 24 03:38 Music
-rw-r--r-- 1 ben users 57047 Jun 24 13:57 Namoroka_wallpaper.png
drwxr-xr-x 2 ben users  4096 Jun 26 00:09 Pictures
drwxr-xr-x 3 ben users  4096 Jun 24 05:03 R
-rw-r--r-- 1 ben users   354 Jul  6 17:15 chmodwiki
-rw-r--r-- 1 ben users  5120 Jun 27 08:28 data
-rw-r--r-- 1 ben users  3339 Jun 27 08:28 datadesign
-rw-r--r-- 1 ben users  2048 Jul  6 12:56 dustprac
-rw-r--r-- 1 ben users  1568 Jun 27 14:11 dustpracdesign
-rw-r--r-- 1 ben users  1532 Jun 27 14:07 dustpracdesign~
-rw-r--r-- 1 ben users   229 Jun 27 14:01 ireland.R
-rw-r--r-- 1 ben users   570 Jun 27 17:02 noattach.R
-rw-r--r-- 1 ben users   588 Jun  5 15:35 noattach.R~

カラムの意味

最初のカラムはファイルのタイプを示しています:

• - は通常のファイルです。
• d はディレクトリ (他のファイルやフォルダを含むフォルダ) です。
• p は名前付きパイプ (別名 FIFO) です。
• l はシンボリックリンクです。

パーミッションの後の文字列、最初のカラムが一番重要です。二番目のカラムはファイルに存在するリンクの数を示しています。無視してかまいません。三番目のカラムは二つの値・名前を含んでいます: 最初の値 (上記の例なら 'ben') はファイルを所有しているユーザーの名前です。二番目の値 (上記の例なら 'users') は所有者が属しているグループです (詳しくはグループを読んで下さい)。

The next column is the size of the file or directory in bytes and information after that are the dates and times the file or directory was last modified, and of course the name of the file or directory.

パーミッションの意味

The first three letters, after the first - or d, are the permissions the owner has. The next three letters are permissions that apply to the group. The final three letters are the permissions that apply to everyone else. Each set of three letters is made up of r w and x. r is always in the first position, w is always in the second position, and x is always in the third position. r is the read permission, w is the write permission, and x is the execute permission. If there is a hyphen (-) in the place of one of these letters it means the permission is not granted, and if the letter is present then it is granted.

フォルダ

In case of folders the mode bits can be interpreted as follows:

• r (read) stands for the ability to read the table of contents of the given directory,
• w (write) stands for the ability to write the table of contents of the given directory (create new files, folders; rename, delete existing files, folders) if and only if execute bit is set. Otherwise this permission is meaningless.
• x (execute) stands for the ability to enter the given directory with command cd and access files, folders in that directory.

Let's see some examples to clarify, taking one directory from above:

# Ben has full access to the Documents directory.
# He can list, create files and rename, delete any file in Documents,
# regardless of file permissions.
# His ability to access a file depends on the file's permission. 
drwx------ 6 ben users  4096 Jul  5 17:37 Documents

# Ben has full access except he can not create, rename, delete
# any file.
# He can list the files and (if file's permission empowers) 
# may access an existing file in Documents.
dr-x------ 6 ben users  4096 Jul  5 17:37 Documents

# Ben can not do 'ls' in Documents but if he knows
# the name of an existing file then he may list, rename, delete or
# (if file's permission empowers him) access it.
# Also, he is able to create new files.
d-wx------ 6 ben users  4096 Jul  5 17:37 Documents

# Ben is only capable of (if file's permission empowers him) 
# access those files in Documents which he knows of.
# He can not list already existing files or create, rename,
# delete any of them.
d--x------ 6 ben users  4096 Jul  5 17:37 Documents

You should keep in mind that we elaborate on directory permissions and it has nothing to do with the individual file permissions. When you create new file it is the directory what changes, that is why you need write permission to the directory.

ノート: To keep out graphical file managers, you ought to remove r, not x.

ファイル

Let's look at another example, this time of a file, not a directory:

-rw-r--r-- 1 ben users  5120 Jun 27 08:28 data

- rw- r-- r-- 1 ben users 5120 Jun 27 08:28 data (Split the permissions coloumn again for easier interpretation)

Here we can see the first letter is not d but -. So we know it is a file, not a directory. Next the owners permissions are rw- so the owner has the ability to read and write but not execute. This may seem odd that the owner does not have all three permissions, but the x permission is not needed as it is a text/data file, to be read by a text editor such as Gedit, EMACS, or software like R, and not an executable in it's own right (if it contained something like python programming code then it very well could be). The group's permssions are set to r--, so the group has the ability to read the file but not write/edit it in any way - it is essentially like setting something to Read-Only. We can see that the same permissions apply to everyone else as well.

chmod コマンドでパーミッションを変更

chmod is a command in Linux and other Unix-like operating systems. It allows you to change the permissions (or access mode) of a file or directory.

テキストを使う方法

To change the permissions-or access mode-of a file, we use the chmod command in a terminal. Below is the command's general structure:

chmod who=permissions filename

Where Who is any from a range of letters, and each signifies who you are going to give the permission to. They are as follows:

u - The user that own the file.
g - The group the file belongs to.
o - The other users i.e. everyone else.
a - all of the above - use this instead of having to type ugo.

The permissions are the same as already discussed (r, w, and x).

Let's have a look at some examples now using this command. Suppose we became very protective of the Documents directory and wanted to deny everybody but ourselves, permissions to read, write, and execute (or in this case search/look) in it:

Before: drwxr-xr-x 6 ben users  4096 Jul  5 17:37 Documents

Command 1: chmod g= Documents
Command 2: chmod o= Documents

After: drwx------ 6 ben users  4096 Jul  6 17:32 Documents

Here, because we want to deny permissions, we do not put any letter after the = where permissions would be entered. Now you can see that only the owner's permissions are rwx and all other permissions are -'s.

This can be reverted with:

Before: drwx------ 6 ben users  4096 Jul  6 17:32 Documents

Command 1: chmod g=rx Documents
Command 2: chmod o=rx Documents

After: drwxr-xr-x 6 ben users  4096 Jul  6 17:32 Documents

In the next example, we want to grant read and execute permissions to the group, and other users, so we put the letters for the permissions (r and x) after the =, with no spaces.

You can simplify this to put more than one who letter in the same command e.g:

chmod go=rx Documents

ノート: It does not matter which order you put the who letters or the permission letters in a chmod command: you could have chmod go=rx File or chmod og=xr File. It is all the same.

Now let's consider a second example, say we want to change our data file so that we have read and write permissions, and fellow users in our group users who may be colleagues working with us on data, can also read and write to it, but other users can only read it:

Before: -rw-r--r-- 1 ben users  5120 Jun 27 08:28 data

Command1: chmod g=rw data

After: -rw-rw-r-- 1 ben users  5120 Jun 27 08:28 data

This is exactly like the first example, but with a data file, not a directory, and we grant a write permission (just so as to give an example of granting every permission).

テキストを使う方法のショートカット

The chmod command lets us add and subtract permissions from an existing set using + or - instead of =. This is different to the above commands, which essentially re-write the permissions (i.e. to change a permission from r-- to rw-, you still need to include r as well as w after the = in the chmod command. If you missed out r, it would take away the r permission as they are being re-written with the =. Using + and - avoid this by adding or taking away from the current set of permissions).

Let's try this + and - method with the previous example of adding write permissions to the group:

Before: -rw-r--r-- 1 ben users 5120 Jun 27 08:28 data

Command: chmod g+w data

After: -rw-rw-r-- 1 ben users  5120 Jun 27 08:28 data

Another example, denying write permissions to all (a):

Before: -rw-rw-r-- 1 ben users  5120 Jun 27 08:28 data

Command: chmod a-w data

After: -r--r--r-- 1 ben users  5120 Jun 27 08:28 data

パーミッションのコピー

It is possible to tell chmod to copy the permissions from one class, say the owner, and give those same permissions to group or even all. To do this, instead of putting r, w, or x after the =, we put another who letter. e.g:

Before: -rw-r--r-- 1 ben users 5120 Jun 27 08:28 data

Command: chmod g=u data

After: -rw-rw-r-- 1 ben users 5120 Jun 27 08:28 data

This command essentially translates to "change the permissions of group (g=), to be the same as the owning user (=u). Note that you cannot copy a set of permissions as well as grant new ones e.g.:

chmod g=wu data

In that case, chmod will have a small fit and throw you an error.

数字を使う方法

chmod can also set permissions using numbers.

Using numbers is another method which allows you to edit the permissions for all three owner, group, and others at the same time. This basic structure of the code is this:

chmod xxx file/directory

Where xxx is a 3 digit number where each digit can be anything from 1 to 7. The first digit applies to permissions for owner, the second digit applies to permissions for group, and the third digit applies to permissions for all others.

In this number notation, the values r, w, and x have their own number value:

r=4
w=2
x=1

To come up with a three digit number you need to consider what permissions you want owner, group, and user to have, and then total their values up. For example, say I wanted to grant the owner of a directory read write and execution permissions, and I wanted group and everyone else to have just read and execute permissions. I would come up with the numerical values like so:

Owner: rwx = 4+2+1=7
Group: r-x = 4+0+1=5 (or just 4+1=5)
Other: r-x = 4+0+1=5 (or just 4+1=5)

Final number = 755

Command: chmod 755 filename

This is the equivalent of using the following:

chmod u=rwx filename
chmod go=rx filename

Most folders/directories are set to 755 to allow reading and writing and execution to the owner, but deny writing to everyone else, and files are normally 644 to allow reading and writing for the owner but just reading for everyone else, refer to the last note on the lack of x permissions with non executable files - its the same deal here.

To see this in action with examples consider the previous example I've been using but with this numerical method applied instead:

Before: -rw-r--r-- 1 ben users  5120 Jun 27 08:28 data

Command: chmod 664 data

After: -rw-rw-r-- 1 ben users  5120 Jun 27 08:28 data

If this were an executable the number would be 774 if I wanted to grant executable permission to the owner and group. Alternatively if I wanted everyone to only have read permission the number would be 444. Treating r as 4, w as 2, and x as 1 is probably the easiest way to work out the numerical values for using chmod xxx filename, but there is also a binary method, where each permission has a binary number, and then that is in turn converted to a number. It is a bit more convoluted, but I include it for completeness.

Consider this permission set:

- rwx r-x r--

If you put a 1 under each permission granted, and a 0 for every one not granted, the result would be something like this:

- rwx rwx r-x
 111 111 101  

You can then convert these binary numbers:

000=0	    100=4
001=1	    101=5
010=2	    110=6
011=3	    111=7

The value of the above would therefore be 775.

Consider we wanted to remove the writable permission from group:

- rwz r-x r-x
 111 101 101

The value would therefore be 755 and you would use chmod 755 filename to remove the writable permission. You will notice you get the same three digit number no matter which method you use. Whether you use text or numbers will depend on personal preference and typing speed. When you want to restore a directory or file to default permissions i.e. read and write (and execute) permission to the owner but deny write permission to everyone else, it may be faster to use chmod 755/644 directory/filename. But if you are changing the permissions to something out of the norm, it may be simpler and quicker to use the text method as opposed to trying to convert it to numbers, which may lead to a mistake. It could be argued that there isn't any real significant difference in the speed of either method for a user that only needs to use chmod on occasion.

まとめて chmod

Generally directories and files should not have the same permissions. If it is necessary to bulk modify a directory tree, use find to selectively modify one or the other.

To chmod only directories to 755:

$ find directory -type d -exec chmod 755 {} +

To chmod only files to 644:

$ find directory -type f -exec chmod 644 {} +

chown コマンドで所有者を変更

Whilst this is an article dedicated to chmod, chown deserves mention as well. Where chmod changes the access mode of a file or directory, chown changes the owner of a file or directory, which is quicker and easier than altering the permissions in some cases, but do be careful when you do so.

Consider the following example, making a new partition with GParted for backup data. Gparted does this all as root so everything belongs to root. This is all well and good but when it came to writing data to the mounted partition, permission was denied.

brw-rw----  1 root disk      8,   9 Jul  6 16:02 sda9
drwxr-xr-x 5 root  root 4096 Jul  6 16:01 Backup

As you can see the device in /dev is owned by root, as is where it is mounted (/media/Backup). To change the owner of where it is mounted one can do the following:

Before: drwxr-xr-x 5 root  root 4096 Jul  6 16:01 Backup

Command: chown ben Backup  (cd'd to /media first)

After drwxr-xr-x 5 ben  root 4096 Jul  6 16:01 Backup

Now the partition can have backup data written to it as instead of altering the permissions, as the owner already has rwx permissions, the owner has been altered to the user ben. Alternatives would be to alter the permissions for everyone else (undesirable as it's a backup permission) or adding the user to the group root.

アクセス制御リスト

アクセス制御リストはファイルシステムに柔軟なパーミッション機構を追加し、あらゆるユーザーやグループにあらゆるファイルのパーミッションを設定することができます。

アクセス制御リストがあるかどうかは ls コマンドの出力にプラス記号 (+) があるかで確認できます。

ファイルの属性

ユーザーやグループの読み書きや実行権限を制御するファイルモードビットとは別に、ファイル操作の可否を細かくカスタマイズするためのファイル属性をファイルシステムがサポートしている場合があります。このセクションではそれらの属性を使用する方法を説明します。

警告: By default, file attributes are not preserved by cp, rsync, and probably others.

chattr と lsattr

For ext2 and ext3 file systems, the e2fsprogs package contains the programs lsattr and chattr that list and change a file's attributes, respectively. Though some are not honored by all file systems, the available attributes are:

• a : append only
• c : compressed
• d : no dump
• e : extent format
• i : immutable
• j : data journalling
• s : secure deletion
• t : no tail-merging
• u : undeletable
• A : no atime updates
• C : no copy on write
• D : synchronous directory updates
• S : synchronous updates
• T : top of directory hierarchy

For example, if you want to set the immutable bit on some file, use the following command:

# chattr +i /path/to/file

To remove an attribute on a file just change + to -.

拡張属性

From attr(5): "Extended attributes are name:value pairs associated permanently with files and directories". There are four extended attribute classes: security, system, trusted and user.

警告: By default, extended attributes are not preserved by cp, rsync, and probably others.

ユーザー拡張属性

User extended attributes can be used to store arbitrary information about a file. To create one:

$ setfattr -n user.checksum -v "3baf9ebce4c664ca8d9e5f6314fb47fb" foo.bar

Use getfattr to display extended attributes:

$ getfattr -d foo.bar
# file: foo.bar
user.checksum="3baf9ebce4c664ca8d9e5f6314fb47fb"

参照

• wikipedia:Chattr
• Linux File Permission Confusion
• Linux File Permission Confusion part 2
• wikipedia:Extended file attributes#Linux
• Extended attributes: the good, the not so good, the bad.
• Backup and restore file permissions in Linux