キーボード入力

関連記事

• 特別なキーボードキー
• 入力リマップユーティリティ

キーマッピングを変更する前に、キーを押した結果どの記号になるかを知っておく必要があります:

1. The keyboard sends a scancode to the computer.
2. The Linux kernel maps the scancode to a keycode, see Map scancodes to keycodes.
3. The keyboard layout maps the keycode to a symbol or keysym, depending on what modifier keys are pressed.
   • For the Linux console, see Linux console/Keyboard configuration.
   • For Xorg and Wayland, see Xorg/Keyboard configuration.

Most of your keys should already have a keycode, or at least a scancode. Keys without a scancode are not recognized by the kernel; these can include additional keys from "gaming" keyboards, etc.

In Xorg, some keysyms (e.g. XF86AudioPlay, XF86AudioRaiseVolume etc.) can be mapped to actions (i.e. launching an external application). See Keyboard shortcuts#Xorg for details.

In Linux console, some keysyms (e.g. F1 to F246) can be mapped to certain actions (e.g. switch to other console or print some sequence of characters). See Console keyboard configuration#Creating a custom keymap for details.

スキャンコードの確認

showkey を使う

The traditional way to get a scancode is to use the showkey(1) utility. showkey waits for a key to be pressed, or exits if no keys are pressed within 10 seconds. For showkey to work you need to be in a virtual console, not in a graphical environment or logged in via a network connection. Run the following command:

# showkey --scancodes

and try to push keyboard keys; you should see scancodes being printed to the output.

evtest を使う

For USB keyboards, it is apparently necessary to use evtest(1) from the evtest package instead of showkey [1]:

# evtest /dev/input/event12

...
Event: time 1434666536.001123, type 4 (EV_MSC), code 4 (MSC_SCAN), value 70053
Event: time 1434666536.001123, type 1 (EV_KEY), code 69 (KEY_NUMLOCK), value 0
Event: time 1434666536.001123, -------------- EV_SYN ------------

ヒント: If you do not know which event number has device of your interest, you can run evtest without parameters and it will show you list of devices with their event numbers, then you can enter needed number.

Use the "value" field of MSC_SCAN. This example shows that NumLock has scancode 70053 and keycode 69.

dmesg を使う

ノート: This method only identifies unknown keys.

You can get the scancode of a key by pressing the desired key and looking at the output of dmesg. For example, if you get:

Unknown key pressed (translated set 2, code 0xa0 on isa0060/serio0

then the scancode you need is 0xa0.

キーコードを確認する

The Linux keycodes are defined in /usr/include/linux/input-event-codes.h (see the KEY_ variables).

コンソールでキーコードを確認する

The keycodes for virtual console are reported by the showkey(1) utility. showkey waits for a key to be pressed and if none are, in a span of 10 seconds, it quits. To execute showkey, you need to be in a virtual console, not in a graphical environment. Run the following command:

# showkey --keycodes

and try to push keyboard keys; you should see keycodes being printed to the output.

Xorg でキーコードを確認する

ノート: The Xorg keycodes are 8 larger than the Linux keycodes.[2]

The keycodes used by Xorg are reported by a utility called xev(1), which is provided by the xorg-xev package. Of course to execute xev, you need to be in a graphical environment, not in the console.

With the following command you can start xev and show only the relevant parts:

$ xev | awk -F'[ )]+' '/^KeyPress/ { a[NR+2] } NR in a { printf "%-3s %s\n", $5, $8 }'

Here is an example output:

38  a
55  v
54  c
50  Shift_L
133 Super_L
135 Menu

Xbindkeys is another wrapper to xev that reports keycodes.

If you press a key and nothing appears in the terminal, it means that either the key does not have a scancode, the scancode is not mapped to a keycode, or some other process is capturing the keypress. If you suspect that a process listening to X server is capturing the keypress, you can try running xev from a clean X session:

$ xinit /usr/bin/xterm -- :1

参照

• kbd-project - showkeys ユーティリティの公式ページ
• wev - xorg の xev に似た wayland イベントビューア