I2C
関連記事
I²C or I2C (Inter-IC) is a synchronous, multi-controller/multi-target (controller/target), packet switched, single-ended, serial communication bus invented in 1982 by Philips Semiconductors.
It is used by many hardware boards to communicate with general purpose I/O (GPIO) devices.
A similar extension of I2C is SMBus which is more specifically used for hardware monitoring purposes.
Installation
I2C kernel modules already exist in most default kernel packages.
Userspace tools can be installed from i2c-tools. Bleeding edge is on i2c-tools-gitAUR.
SMBus-specific tools can be installed from lm_sensors.
Module loading
In some cases it might be required to load the module at boot:
/etc/modules-load.d/i2c-dev.conf
i2c-dev
This will not be needed after FS#76233 is fixed.
Depending on your system and usage, other hardware-specific modules such as i2c_i801
or i2c_smbus
might have to be loaded as well.
If the modules are properly loaded, you should see the /dev/i2c-*
devices.
Permission for using the /dev/i2c-*
devices can be granted by adding the user to the i2c
user group.
Usage
i2cdetect
can detect all the active I2C devices:
$ i2cdetect -l
i2c-0 i2c Synopsys DesignWare I2C adapter I2C adapter i2c-1 i2c Synopsys DesignWare I2C adapter I2C adapter i2c-2 i2c Synopsys DesignWare I2C adapter I2C adapter i2c-3 i2c Synopsys DesignWare I2C adapter I2C adapter i2c-4 smbus SMBus I801 adapter at f040 SMBus adapter i2c-5 i2c i915 gmbus dpb I2C adapter i2c-6 i2c i915 gmbus dpc I2C adapter i2c-7 i2c i915 gmbus misc I2C adapter i2c-8 i2c AUX B/DDI B/PHY B I2C adapter
When an I2C device is connected to a known bus, i2cdetect
can probe it for active addresses:
$ i2cdetect 1
0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: 60 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- 76 --
Be wary that this program can confuse your I2C bus, cause data loss and worse.